User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page113of208
February5,2015

RadioAccessSettings
Note:DifferentversionsoftheRLX2radiossupportdifferentfunctionality.Youmaysee
moreorfeweroptionsonthispage,dependingontheversionoftheradioyou
purchased.
Inordertoconfigureordiagnosearadiousingitsbuilt‐inWebserverorSNMPagent,
bothyourcomputerandradiomustha
veIPaddresses,andtheseIPaddressesmustbe
onthesamesub‐network.AnIPaddressisonlyne ededsoyoucanfiguretheradioand
viewitsdiagnosticsettings.Otherwise,theaddressisunnecessary.
Thefollowingfieldsappearinthe SecuritySettingsareaontherightsideoftheRadio
Configurationwindow.

Field
Description
ObtainIPaddress‐DHCP
AllowstheradiotoobtainitsIPaddressfromaDHCPserver.
UsethefollowingIPaddress
SpecifiesaStaticIPaddresstotheradio.EntertheIPaddressinformationin
thefollowingfields.
IPAddress
UseanIPaddressthatwillnotinterferewithanyotherdevicesonthe
network.RequestablockofIPaddressestousefromtheNetwork
Administrator.
SubnetMask
SubnetMaskprovidedbytheNetworkAdministrator.