User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page117of208
February5,2015

Field
Description
SerialEncapsulationMode
None:Noserialdataencapsulation.
UDP:InUDPmode,programsonnetworkedcomputerscanbeusedtosend
shortmessagesorDatagrams.Onceenabled,theserialportisusedto
transmitandreceivepackets.
NOTE:InUDPmodeifamulticastgroupaddressisenteredinthisfieldthen
packetsarese
nttothataddress.
TCPServer:InTCPServermode,onlyconnectionsfromthisaddresswillbe
accepted.Oncethesessionisestablished,theserialportisenabledto
transmitandreceivepackets.
NOTE:ToacceptconnectionsfromanyIPaddressthefieldshouldbesetto
0.0.0.0.
TCPClient:InTC
PClientmode,aTCPconnectionwillbeestablishedwiththis
address.
Whenthesessionisestablished,theserialportisenabledtotransmitand
receivepackets.
SingleIPAddress
IPAddressorURLoftheradiothatshouldreceiveencapsulatedserial
protocolpackets.
RangeofIPAddresses
Upto4IPAddressrangesforradiosthatshouldreceiveencapsulatedserial
protocolpackets.
RemotePortNumber
RemoteUDPportnumbertouseforencapsulatedserialdatatransmission.
LocalPortNumber
LocalUDPportnumbertouseforencapsulatedserialdatatransmission.
DelineationMethod
None:Alldatareceivedbetweenpacketdelineationeventsissenttothe
remotenodeinasinglenetworkframe.
TimeGap:Theminimumtimegapbetweencharactersthatistobe
interpretedasadelineatorforapacket.ConfigurethisvalueintheEOLTime
Gapfield.
Character:Theparticula
rcharactersequenceinthestreamofcharacters
thatindicatesthedelineatorforthepacket.ConfigurethisvalueintheEOL
Delineatorfield.
EOLDelineator
AvailablewhentheselectedDelineationMethodisCharacter.Choosethe
typeofdelineatortousefromthedropdownlist:
Availabledelineationtypesare:
Type
Decimal Hex Description
UseText
 
Anystringofcharacters
CR
13 0D CarriageReturn
ESC
27 1B Escape
LF
10 0A LineFeed(NewLine/nl)
Null
00 00 Null
Spacebar
32 20 Space
Tab
09 09 HorizontalTab
