User's Manual

RLX2 Industrial Hotspot Series

ProSoftTechnology,Inc. Page147of208
February5,2015

ShowParents‐All
TheShowParentsfunctiondisplaysthepossiblealternateparentsforarepeater
graphicallyinthetopology view.Thelinkfromtherepeatertoitscurrentparentwillbe
showninred.Iftherepeatercanhearotherradiosinthenetwork,linkstothoseradios
willbeshowninblue.Thisgivesagraph
icalrepresentationofthenumberofalternate
pathsavailabletoaradioshoulditsparentlinkgodown.Adetailedlistofeachofthe
alternatescanbeseen byright‐clickingandselecting‘ScanList'.Thislist,though,shows
notonlyradiosinthesamenetworkbutalso802.11radiosonotherne
tworks.
ByselectingAll,alternatepathsforallrepeatersinthenetworkwillbeshown.By
selectingOne,alternatepathswillbeshownonlyfortheonerepeaterthatiscurrently
selected.
ShowParents–AllisonlyavailableintheTopologyView.
ShowParents‐One
ThisissimilartoShowParents–Allexceptthatonlythecurrentparentisshown.
PrintArea

UsethePrintAreacommandtoshowtheborderaroundtheareaoftheIHBrowser
window.Toprint,usethePrintcommandontheFilemenu.