User's Manual

RLX2 Industrial Hotspot Series

Page184of208 ProSoftTechnology,Inc.
 February5,2015

ApprovedAntennaTable
Usethefollowingapprovedantennaswhentheradiomoduleisconnecteddirectlytoan
antenna.RefertoApprovedantennaswithpowerampforatableofapprovedantennas
withbi‐directionalpoweramplifiers.
Type
Pattern Gain Connecto
r
Size (cm) Min. distance
from Body
1/2Wave
Omni 2dB SMA‐RP 7Hx1.5 20cm
1/2Waveart.
Omni 2dB SMA‐RP 10Hx1.0 20cm
CollinearArray
Omni 3dB SMA‐RP 6Hx3.0 20cm
CollinearArray,art.
Omni 5dB SMA‐RP 19Hx1.0 20cm
CollinearArray
Omni 5dB SMA‐RP 19Hx1.0 20cm
CollinearArray
Omni 8dB N‐RP 43Hx1.6 20cm
CollinearArray
Omni 9dB N‐RP 43Hx1.6 20cm
CollinearArray
Omni 12dB N‐RP 106Hx4.0 25cm
Patch
Directional 8dB SMA‐RP 15.0Hx15.0 20cm
Patch
Directional 11dB SMA‐RP 22Hx12.7 22cm
Patch
Directional 13dB N‐RP 22Hx22 28cm
Patch*
Directional 19dB N‐RP 15.5x15.5 57cm
Yagi
Directional 14dB N‐RP 81Lx9.0 28cm
Parabolic*
Directional 15dB N‐RP 40Hx51Wx25D 36cm
Parabolic*
Directional 19dB N‐RP 58Hx66Wx26D 57cm
Parabolic*
Directional 24dB N‐RP 78Hx96Wx29D 100cm
*Onlyallowedinapoint‐to‐pointnetwork.
ApprovedAntennasinEurope/CE
Thegainoftheantennaconnectedtothemainantennaport,minustheantennacable
loss,mustbelessthan4dBtostaybelowthe100‐mWEIRPtransmitpowerlimit.
TheAUXportisonlyusedtoreceive;itnevertransmits.
Note: In France, the user is responsible for ensuring that the selected frequency channels comply
with French regulatory standards. At the time of this printing, only channels 10 through 13 can be
used in France.