User's Manual

RLX2 Industrial Hotspot Series

Page44of208 ProSoftTechnology,Inc.
 February5,2015



4. OpenacommandpromptontheclientPC,andtrytopingtheIPaddressoftheMaster
radio.Itshouldrespondasseenbelow:


InstallReplacementRadioUsingPersonalityModule
Iftheradiobeinginstalledisreplacinganexistingradio,andaPersonalityModulewas
alreadyinstalledintheexistingradio,thennomanualconfigurationisnecessary.
RemovethePersonalityModulefromtheexistingradiowiththestoredconfiguration