User's Manual

How to connect the
BLE Hubs
1. Type in your network ssid
“ssid:XXXXXXXXX”
2. Press enter
3. Type in your network password
4. “password:12345678”
5. Press enter
6. Type in Commit
7. Once connected you will see Picture 2
8. Under BLE line: you will see the BLE
sensor ID appear inside when you
connect the BLE chipset to the
equipment.(Picture 3)
9. This mean the receiver have received
the BLE signal from the sensor
Picture 2
Picture 3
Green Network light
connected to wifi