PL009 Operating Manual
Introduction Prospera’s PL009 Electronic Pulse Massager is a user friendly product. Electronic Pulse Massager delivers electric impulses to tired and sore muscles. These impulses are generated by the device and delivered through electrodes to the skin in direct proximity to the target muscles. The impulses mimic the action potential coming from the central nervous system to trigger contraction of the muscle.
Content Safety Warnings………………………………………………………….3 Set up……………………………………………………………………..4 Operating the product…………………………………………………….5~6 Trouble shooting………………………………………………………….7 Consumer warranty ……………………………………………………….8 Use positions diagrams……………………………………………………9 Warranty card…………………………………………………………….
Safety Warnings 1. Do not use this unit if you are using an implanted electronic medical device such as a pacemaker or other life maintaining device. 2. Do not use this unit if you are wearing electronic medical devices for monitoring health functions. If you have one of the following conditions, please consult with your physician before purchasing or using this device. If you have any doubt as to your health status, please consult your physician prior to use.
Set up Unpack the box of the product, take the product and batteries out, place the batteries into the device at its back compartment, and connect the electrode pads into the device through the wires.
Operating the product Power button turns on/off the device. Intensity 1 and Intensity 2 control the strength of the pulse. Auto Procedure: 6 automatic stimulation programs for waist, shoulder, joint, hand/foot, sole and repeat to stimulate the same area again. Speed buttons increase or decrease the speed of the pulse. Three selectable manual programs for massage, beating, and kneading. The LCD screen displays massage style, intensity and time remaining in session.
Operating the product To begin 1. Make sure the power/intensity switch is off and install 4 AAA batteries into the device. 2. Connect 1 electrode wire in the left hole and another electrode wire in the right hole at the top of the pulse massager. 3. Attach the electrode pads to the treatment area, such as shoulder. 4. Turn the power/intensity switch to 1. The screen should show P. This means the device is ready to begin treatment. 5. Press one of the function keys to choose treatment. 6.
Trouble shooting If your device is not operating properly, please check it for the following problems or conditions. If the recommended action does not solve the problem, please return it to the authorized dealer for repair of the device. MALFUNCTION Stimulation is weak or not existent Skin turns red Skin feels numb Device does not turn on CAUSE Are the electrode heads in close contact with the skin? SOLUTION Remove, clean and place back on the skin.
Consumer Warranty Prospera offers a 90-day standard warranty to the massage products. Labor and parts are included during warranty period. Consumers are required to provide model number and dated proof of purchase (sales receipt) when contacting Prospera for the warranty service. Non-warranty service is provided on a “per incident” basis. The consumer will verify that the product has failed and provide information for servicing the unit.
Positions
Warranty card Warranty Registration Form Product Name: __________________________________ Product Model: __________________ Purchase Price: __________________ Date of Purchase: __________________Retailer: __________________ First Name: __________________ Last Name: __________________ Address: __________________ City: __________________ State: __________ Zip : ___________ Phone: __________________Email: __________________ Signature and date: __________________ Please mail to: Prospera Corporation 405 Bould
Prospera Corporation 405 Boulder Court, Suite 500 Pleasanton, CA 94566 Tel: (925) 225 0888 www.prosperacorp.