GoFree™ Pro MODEL 1073160 O W NE R’S M A NU A L WARNING Read Owner's Manual before using this product. Faliure to do so can result in serious injury or death.
Read all instructions before using. Save these instructions. Following the cleaning instructions will prolong the life of your ProTeam vacuum. Lea todas las instrucciones antes de usarla. Conserve estas instrucciones. Seguir las instrucciones de limpieza prolongara la vida de su aspiradora. reference info Veuillez lire toutes les instructions avant d’utiliser l’aspirateur; conservez le guide pour références ultérieures.
Contents / Contenido / Table des matières Inspection / Inspección / Inspection.................................................................................................................................................................................................................................................................................... 2 Important Safety Instructions / Instrucciones importantes de seguridad / Importantes mesures de sécurité ..................................................
INSPECTION Carefully unpack and inspect your new ProTeam vacuum for shipping damage. Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, contact ProTeam immediately (866.888.2168). All returns must have a Return Authorization Number (RAN). This manual has important information for the use and safe operation of the vacuum cleaners. Read this manual carefully before starting the machine.
IMPORTANT SAFETY INSTRUCTIONS INSTRUCCIONES IMPORTANTES SOBRE SEGURIDAD CONSIGNES INSPECTION DE SÉCURITÉ IMPORTANTES When using an electrical appliance, basic precautions should always be followed, including the following.
IMPORTANT SAFETY INSTRUCTIONS INSTRUCCIONES IMPORTANTES SOBRE SEGURIDAD CONSIGNES DE SÉCURITÉ IMPORTANTES When using an electrical appliance, basic precautions should always be followed, including the following.
INTRODUCTION WARNING To reduce the risk of fire, electric shock, or injury: • DO NOT vacuum liquids or expose the vacuum to rain or water. • DO NOT vacuum hazardous or toxic materials. • DO NOT use vacuums to pick up flammable or combustible materials and do not store them in the filter bag.
INTRODUCTION INTRODUCCIÓN CHARGER GROUNDING INSTRUCTIONS INSTRUCCIONES DE CARGADOR CONEXIÓN A TIERRA Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you are unsure that the outlet is properly grounded. Do not modify the plug provided with the charger. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
(1) (2) (3) (4) (6) (7) (8) OPERATING INSTRUCTIONS (5) (9) (10) (11) Full 100% Compl eto Figure A Figure B Figure C DESCRIPCIÓN GENERAL DE COMPONENTES OVERVIEW DES COMPOSANTS • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Vacuum (1) Battery (2) Charger (3) Charger Cord (4) Hose (5) Wand (6) Accessories (7) Intercept Micro Filter (8) Micro Cloth Filter (9) Dome Filter (10) 2 HEPA Exhaust Filters (11) 1. Plug the charger's power cord into the charger (Figure A). 2.
OPERATING INSTRUCTIONS QUICK START Figure A Figure B 1. Unlatch the 3 clamps on the top of the unit and remove cap (Figure A). 2. Remove filters (Figure B). 3. Check to make sure the Dome Filter did not shift during shipping (Figure C). 4. Replace the Intercept Micro Filter and the Micro Cloth Filter into the vacuum (Figure B). 5. Replace the cap and relatch the 3 clamps (Figure A). 6. Push the hose into the cap opening (Figure D). HARNESS HEIGHT ADJUSTMENT 1.
OPERATING INSTRUCTIONS Upper Harness Buckle WEARING THE BACKPACK VACUUM Figure G Figure H Figure I Figure J 1. Loosen the shoulder straps and the waist belt. Lift the vacuum and slide your arms through the straps (Figure G). The upper harness can also be adjusted by tightening or loosening the upper harness buckles for a custom fit. 2. Connect the waist strap (Figure H). 3.
OPERATING INSTRUCTIONS TROUBLESHOOTING 1. If the vacuum will not operate, check the following: a. The battery pack connection to the vacuum. b. The battery pack is charged. c. That the switch is in the “on” position and functioning properly. 2. If the battery pack is not charging, check that the charger is plugged into 120 Volt outlet and that the battery is properly connected to the charger. Also check fuse in charger. 3.
FILTER MAINTENANCE Figure A Figure B Figure C Figure D Figure E Figure F 1. Empty and inspect the Intercept Micro Filter every time you start and finish vacuuming (Figure A). Replace if necessary. A clogged and dirty filter restricts airflow and results in reduced suction and overheating. 2. To replace the Intercept Micro Filter, slide filter into the Cloth Filter and secure into vacuum (Figure B). 3. Once a month, or as necessary, hand or machine wash the Cloth Filter and let it air dry.
