SDS

_____________________________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Aluminum oxide
1344-28-1
TWA: 1 mg/m
3
respirable fraction TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable fraction
(vacated) TWA: 10 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
Silver
7440-22-4
TWA: 0.1 mg/m
3
dust and fume TWA: 0.01 mg/m
3
(vacated) TWA: 0.01 mg/m
3
IDLH: 10 mg/m
3
dust
TWA: 0.01 mg/m
3
dust
_____________________________________________________________________________________________
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
Ensure adequate ventilation. Use personal protection equipment. Use with local exhaust
ventilation. Do not breathe vapor or mist. Avoid contact with eyes. Avoid contact with skin.
Avoid contact with skin and eyes.
Conditions for safe storage, including any incompatibilities
Storage
Keep container tightly closed. Keep out of the reach of children. Keep containers tightly
closed in a cool, well-ventilated place. Keep in properly labeled containers.
Incompatible Products
None known.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Use personal protective equipment as required. Avoid contact with skin and eyes. Evacuate
personnel to safe areas. Keep people away from and upwind of spill/leak.
Environmental Precautions
Environmental Precautions
Prevent entry into waterways, sewers, basements or confined areas. Do not flush into
surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Methods for cleaning up
Pick up and transfer to properly labeled containers. Use personal protective equipment as
required. Cover powder spill with plastic sheet or tarp to minimize spreading and keep
powder dry. Avoid generation of dust. Clean contaminated surface thoroughly. Soak up with
inert absorbent material. Dam up. Sweep up and shovel into suitable containers for
disposal. After cleaning, flush away traces with water.
Revision Date 20-Apr-2015
Page 4 / 10
1036018 - Protec Antimicrobial Cleaning Cartridge PC-1