Photo Printer User Manual

24 COMPACT 2

Maintenance / Disposal

2.31. If required repeat items 2.20 to 2.30 (observe information concerning temperature, time, cleaning procedure

contained in the

2.32. datasheet of the tank cleaning agent)

2.33. Remove roller racks from the machine and remove dirt under flowing water using a soft rag or sponge

2.34. Remove residual dirt particles in tanks and rinsing gutters.

2.35. Clean all toothed gear wheels, axles, bearings and rollers, check them for damage (replace if required)

2.36. Remove light barrier and clean it with a soft rag

2.37. Clean inlet plate using a soft rag

2.38. Reinstall light barrier

2.39. Align roller racks and re-insert them in machine

2.40. Fill machine with chemicals

2.41. Switch machine on

2.42. Adjust bath temperature to previously adjusted value

2.43. Feed cleaning film (approx. 4 pieces)

2.44. Check function as described under item 1.

2.45. Approx. 15 minutes after reaching of the set bath temperature, measure it for confirmation and re-calibrate if

required (see operating manual page 39)

2.46. Perform sensitometric test

Please dispose of all old devices in an environmentally

friendly manner.

Old devices contain materials which need to be recycled. Please

have them collected separately and recycle appropriately.