User`s manual

Chapter 4 Award BIOS Setup
Prox-1750G1/G2 USER ′ S MANUAL
Page: 4-21
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system configuration has caused such a
serious conflict that the operating system can not boot.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the booth
and Plug and Play-compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system
such as Windows 95. By choosing “manual”, you are allowed to
configure the IRQ Resources, DMA Resources and Memory Resources.
The choices are Auto(ESCD) and Manual.
IRQ RESOURCES:
You may assign each system interrupt a type, depending on the type of
device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 ASSIGNED TO:
This item allows you to determine the IRQ assigned to ISA bus and is not
available to any PCI slot. Legacy ISA for devices compliant with the origi-
nal PC AT bus specification, PCI/ISA PnP for devices compliant with the
Plug and Play standard whether designed for PCI or ISA bus architecture.
DMA RESOURCES:
When resources are controlled manually, assign each system DMA channel
a type, depending on the type of device using the DMA channel.
DMA 0/1/3/5/6/7 ASSIGNED TO:
Legacy ISA for devices compliant with the original PC AT bus specifi-
cation, PCI/ISA PnP for devices compliant with the Plug and Play standard
whether designed for PCI or ISA bus architecture.
PCI/VGA PALETTE SNOOP:
Leave this field at disabled.