Operating instructions

Functions That Can Be Controlled from the RCP-1001/1501
74
Chapter 4 Shooting
You can adjust the functions in the following table by using menu operations, adjustment knobs, switches,
and the touch panel on the RCP-1001/1501.
For details on operations, refer to the operation manual of the RCP-1001/1501.
How to Read the Table
In the RCP-1001, and RCP-1501 columns of the table below, “Yes” and “No” mean the following.
Yes: The operation can be performed from the unit.
No: The operation cannot be performed from the unit.
Functions That Can Be Controlled from the RCP-1001/
1501
Menu
items
Sub-item Setting Description RCP-1001/1501
Gain Step Gain – Sets the master gain. Yes
L/M/H Low/Mid/High Switches between three gain levels, when
the master gain has been set from a menu.
No
Step –3/0/3/6/9/12/18/
24/30/36/42dB
Sets the master gain. Yes
Bars Bars On/Off Turns color bar output on or off. Yes
White
Balance
AWB Start/Stop Starts execution of auto white balance
adjustment, or stops execution.
Yes
ATW On/Off Turns ATW on or off. Yes
5600K On/Off Turns color temperature conversion on or
off.
Yes
Black ABB Start/Stop Starts execution of auto black balance
adjustment, or stops execution.
Yes
Iris Iris Mode Auto/Manual Selects the iris mode. Yes
Iris Level –99 to ±0 to +99 Adjusts the level of the auto iris target
value.
Yes
Close On/Off Turns forcible iris closing on or off. Yes
Camcorder
Menu
Menu On/Off Operates the camcorder menu. Yes
Cancel/Preset Cancel/Preset Yes
Select/Set Select (Up/
Down)/Set
Yes
Panel
Active
Panel Active On/Off Enables (On) or disables (Off) panel
operations.
Yes
Standard Standard On/Off Selects standard mode. Yes
ND Filter ND Filter Display only Turns the display of ND filter settings on
or off. (The settings cannot be changed,
only displayed.)
Yes
CC Filter CC Filter A/B/C/D Selects a CC filter. Yes
Call Call On/Off Enables (On) or disables (Off) calls from
externally connected equipment.
Yes