User manual

Chapter 4
Programming
27
Menu navigation
Each menu contains a list of options and/or submenus. Press the scroll up/down buttons to navigate up and
down the list of options and submenus in that menu. Pressing Enter after navigating to an option selects that
option for editing and flashes the current value. Pressing Enter after navigating to a submenu enters that
submenu, making a new list of options accessible. Pressing STATUS exits a menu and goes to the next higher
level.
Programming options are arranged in a menu structure as outlined in Table 11. The top menu contains several
features, as well as the System programming menu. When accessing the System programming or System tests
menu, the panel prompts you to enter an access code. To continue, enter the master code, then press Enter.
To program an option, first navigate to that option until it is displayed, then press Enter. The option value will
start flashing, indicating that it is ready to be changed. Use the scroll keys or enter a numerical value to change
the option, then press the Enter key to save the change.
Table 11. Simon XT menu structure
Set clock (page 28)
Security (page 32)
Downloader enable
Light schedules (page 29)
Phone numbers (page 32)
Sensor lights (page 29)
Phone #4
Chime (page 29)
Timers (page 33)
Special chime (page 30)
Latchkey time
System tests (page 30)
Siren options (page 33)
Sensor test Panel piezo beeps
Communication test Panel voice
System download Panel piezo alarms
Status beep volume
System programming (page 31)
Speaker volume
Access codes (page 31) Light control (page 35)
Dealer code Set entry lights
Master code Sensor lights
User code 1 Light schedules
User code 2 Housecode
User code 3 Sensor-activated light lockout time
User code 4
System tests (page 30)
User code 5 Sensor test
User code 6 Communication test
User code 7 Initiate download call
User code 8
Revision (page 30)
Duress code
Contrast (page 30)