User manual

Simon XT
User Manual
34
3. Scroll up/down to Piezo beeps, then press Enter.
4. The current value of this option now flashes (On or Off).
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.
Panel voice. Panel voice (spoken phrases on the speaker) and key press sounds from the speaker heard
while controlling the system). This option determines whether or not the panel speaks status messages and
arming level changes.
To program Panel voice, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel voice, then press Enter.
4. The current value of this option now flashes (On or Off).
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.
Panel piezo alarms. Loud alarms on the siren. This option determines whether or not the panel sounds
alarm beeps.
To program Panel piezo alarm, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel piezo alrm, then press Enter.
4. The current value of this option now flashes (On or Off).
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.
Status beep volume. This option sets the sound volume of nonalarm beeps. The numerical range is 1 to
10. The default value is 7.
To program Status beep vol, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Status beep vol, then press Enter.
4. The current value of this option now flashes (1 to 10).
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.
Speaker volume. This option sets the sound volume of the panel speaker for key presses and alarm
sounds. The numerical range is 1 to 8. The default value is 8.
To program
Speaker volume, do the following: