The Simon XT Easy Installation Manual This manual is the property of Protect America, Inc. This installation manual contains confidential information which is proprietary to Protect America, Inc. You may not disclose this information to third parties and you may not copy all or any part of this installation manual.
FCC Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by Interlogix, Inc can void the user’s authority to operate the equipment. FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation.
Table of Contents Contents Easy Installation Steps Step 1: Package Contents 2 Step 2: Connect the Simon XT 3 Step 3: Familiarize Yourself with the Simon XT 4 Step 4: Set the Clock, Chime, & Alarm 5 Step 5: Install Line Grabbers & Sensors 6 Step 6: Activate Your System 7 Additional Information About Your System Test Your System Monthly 8 False Alarm Prevention 9 Important Procedures 10 Frequently Asked Questions 11 Sensor Information Worksheet 13 ! Important An Alarm Permit May Be Re
1 ! Check Package Contents Find a convenient location for your Simon XT control panel. It should be located near a phone jack and a non-switched electrical outlet. It should be in a location that can be accessed easily when entering or leaving the home. 1.1 — Verify Contents PA CK IN G L P S I Locate your packing slip. Simon XT Disarmed 12:23a Doors + Windows Motions Disarm Status Silent Bypass Use your packing slip to verify the contents of your package. 1.
2 Connect the Simon XT 2.1 — Connect the Battery CLICK Simon XT Disarmed 12:23a Doors + Windows Motions Disarm Status Silent Bypass Press the two small tabs at the top of the Simon XT. Locate the two red wires on the back of the Simon XT control panel. Clip the two wires together. The Simon XT will power on and beep. DO NOT PLUG IN YOUR SIMON XT! You must connect the battery before plugging your Simon XT into the wall outlet. 2.
3 Familiarize Yourself with the Simon XT 3.1 — The Controls Motions Doors + Windows Press to arm perimeter sensors. Siren The piezo siren is used for status beeps and alarms. Fire and intrusion alarms always sound at high volume. The volume of status beeps (such as trouble or chime beeps, entry and exit delay beeps, or auxiliary alarm beeps) are programmable. Press to arm interior sensors. LCD Display The LCD display can show a variety of phrases and icons.
4 Set the Clock, Chime, and Alarm Programming the Simon XT requires keys to be pressed in order, with little or no delay. It is recommended that you familiarize yourself with these steps before beginning. For initial programming, the default master code is 1234 ( ). Setting the Clock Press SCROLL UP ( ) until the display reads "Set Clock," and then press ENTER ( Enter the master code, then press ENTER twice ( ). ). If no master code has been set, the default master code is 1234.
5 Install Line Grabbers and Sensors 5.1 — Install Line Grabbers (Landline users only) — DO NOT CONNECT A LINE GRABBER TO THE SIMON XT! Repeat this step for every phone in the home. For additional line grabbers please contact Protect America at 1-800-951-5111, option 2. CLIC K CLIC K Disconnect phone from wall. ! Connect the phone to the line grabber. Connect a line grabber to the wall plug. Make sure to clean the installation location before applying each sensor.
6 Activate Your System Additional Equipment If you purchased additional equipment that is not found in this manual, please visit us online at www.protectamerica.com/support for equipment installation guides and manuals. Congratulations! Your system is now installed and ready to be activated. Call to Activate Your system is not yet active—you must call Protect America to activate your system! When calling, please have your Sensor Information Worksheet and your Packing Slip at hand.
Test Your System Monthly 1) Your monitoring service must be placed in test mode to avoid a false alarm and dispatch of emergency response personnel. To put your service into test mode contact Protect America. Central Monitoring Station toll-free 1-877-274-0604 24 Hrs/Day - 7 Days/Wk Customer Service toll-free 1-800-951-5111, option 2 Standard Hours (Back Cover) www.protectamerica.com/monthlytest Click for Live Chat Standard Hours (Back Cover) The siren will sound throughout the test.
False Alarm Prevention What is a false alarm? A false alarm is defined as any signal that elicits a response by police, fire, or emergency medical services for which there is no evidence of any activity that justifies an emergency response. With an estimated 25% yearly increase in alarm systems nationwide, emergency responders are becoming overwhelmed with false alarms. This is resulting in stricter ordinances, severe fines, and limited or no response policies.
Important Procedures Changing / adding access codes The master code is used for all operations including adding, modifying, and removing other codes. Up to eight user codes can be set along with one duress code. The duress code generates a silent duress alarm that is reported to the monitoring station. Press SCROLL UP ( ) until the display reads "System Programming" then press ENTER ( Enter the Master Code, then press ENTER twice ( Press SCROLL UP ( ). ).
Frequently Asked Questions How do I test my security system? Please see "Test Your System Monthly" on page 8 of this manual, or call toll-free 1-800-951-5111, option 2, and a representative will walk you through testing your security system. How many access codes can my Simon XT hold? The Simon XT control panel can store 8 user codes and 1 duress (panic) code in addition to the master code. Why is my system status light on? The system status light will remain lit while a secured door or window is open.
Frequently Asked Questions Why does my Simon XT have two phone lines? The phone line labeled "Wall" is connected to the wall phone jack; it is necessary to communicate to the monitoring station. The second phone line can be used to plug in a telephone. The Simon XT comes equipped with an internal line grabber. Do not connect an additional line grabber to the Simon XT. What is bypass? How do I use it? The bypass feature is used to bypass (deactivate) specific sensor(s) while the system is armed.
Sensor Information Worksheet Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor Sensor 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Location 13
Central Monitoring Station 1-877-274-0604 24 Hrs/Day — 7 Days/Week Customer Service 1-800-951-5111option 2 M-F: 7am - 10pm Central Sat: 8am - 9pm Central Sun: 10am - 8pm Central Contact us before you move for a free Relocation Kit: support@protectamerica.com For online assistance, Live Chat with a service representative, or to purchase additional equipment, visit us at: www.protectamerica.com Protect America, Inc., 3800 Quick Hill Rd. Building 1, Austin, TX 78728.
