User Manual
2
WARNING: This product is part of a personal fall arrest, work positioning, or rescue system. The user must follow the
manufacturer’s instructions for each component of the system. These instructions must be provided to the user of this
equipment. The user must read and understand these instructions before using this equipment. Manufacturer’s instructions
must be followed for proper use and maintenance of this equipment. Alterations or misuse of this product or failure to follow
instructions may result in serious injury or death.
IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact Capital
Safety.
IMPORTANT: Before using this equipment, record the product identication information from the ID label in the inspection
and maintenance log of this manual.
descRIPTIONs:
Rebel SRLs are available in 10 ft. (3.0m) (CSA only), 11 ft. (3.3m) (ANSI only), and 20 ft. (6.0m) (CSA and ANSI) lifeline
lengths (See Figure 1). Rebel SRLs are equipped with an in-line Energy Absorber which retracts into a Thermoplastic Housing.
The Rebel SRL automatically locks at the onset of a fall to arrest the fall, but pays out and retracts lifeline during normal
movement by the attached user. Figure 2 illustrates key components of the base Rebel™ Self Retracting Lifeline (SRL).
Figure 2 – Rebel Self Retracting Lifeline (SRL) Components
B
D
F
G
A
C
E
A - Swivel B -Swivel Eye C - Carabiner D - Housing E - Web Lifeline F - Energy Absorber G - Snap Hook