User manual

Prote

e™ Inte

rated System User Manual

3.0 ARMING/DISARMING

To take full advantage of your Protégé System, you should familiarize

yourself with the different arming methods.

3.1 EXIT DELAY

After entering a valid arming sequence the exit delay time will

provide you with enough time to exit the protected area before the

area arms. The keypad will generate a beep-beep tone repeatedly

during the exit delay period.

The configuration of the exit delay beeper is

dependent on the installation. Please verify the

operation with your security professional or property

manager.

3.2 DISARMING AREAS

An entry point, like a front door, will be programmed with an entry

delay time for an area. When an entry point is opened, the keypad

will emit a continuous audible tone until you disarm the area. Your

Protégé System will not generate an alarm until this timer elapses

allowing you time to disarm the area. Any zone activation on a zone

that is not designated as an entry zone will result in the alarm

activating.

Disarming Your Area

Logon to the LCD Keypad by entering your [USER CODE] followed by

the enter key. Refer to the Logon Keypad Section on Page 18.

The display will show the area associated

with the LCD Keypad you have logged on

Warehouse

is ARMED