User manual

48
Protege™ Integrated System User Manual
to scroll another user or enter the user
number directly.
Scrolling Multiple User Code Entries
When viewing or modifying records each programmable entry can be
scrolled to and from the previous record. In the user entry the
example below details the method to view a user by name.
Select the user as explained in the
Programming User Section on Page 41.
Once the desired user is displayed press
the key to move to the name
programming screen.
Once the user name is displayed use the
up and down keys to scroll to
the next user. Modifications can be made
and WILL be saved if the or
keys are pressed.
In the example shown pressing the
up key moves to the next user
(UN00011) and shows the name.
Removing User Codes
To remove a user code from the system but monitor if the user code
or card has been attempted to be used refer to Disabling User Codes
on Page 49. Follow the procedures below to remove a user number
and associated information or to re-assign the user number to
another user.
Select the user as explained in the
Programming User Section on Page 41.
Once the desired user is displayed press
the key.
Select user to
modify: UN00010
UN00010 Name
J Smith
UN00011 Name
G Bates
Select user to
modify: UN00010