Warranty

PROBoardMAX™ CERTIFICATE OF COMPLIANCE
Protex Products LLC • PO Box 598025 • Chicago • Illinois • 60659-8025
PROTEX® Products herewith declares that PROBoardMAX™ meets the following conditions:
PROBoardMAX™ is a patented extreme-duty water-proof high-density temporary floor and wall surface
protection product that is manufactured with 100% certified FSC® Recycled materials, 100% recycled plastics
and 100% bio-degradable and recyclable adhesives.
During preparation of the stock materials and manufacture of PROBoardMAX™ no bleaching agents or any
of the following chemicals are added or used:
- Polychlorinated biphenyls (PCB)
- Asbestos
- Specified organic tin compounds
- Short-chain paraffin chloride (C10-13)
- Specified bromine-based flame retardants (PBB, PBDE)
- Azo dye and pigment forming specified amines
- Polynaphtalene chloride
- Cadmium and its compounds
- Lead and its compounds
- Hexavalent chromium compounds
- Mercury and its compounds
- Specified amine compounds
- Ozone-depleting substances
- Formaldehyde
Additionally, PROBoardMAX™ complies with the following:
- Forest Stewardship Council - FSC® - practices, standards and principles
- US Green Building Council - LEED® - material and resource standards
- Meets or Exceeds all ANSI, ASTM and TAPPI standards
- European regulation 1999/815/CE for phthalate content.
- German Environmental Label RAL-UZ 56
- EN 71-3 Safety of Toys Requirements
- European Parliament and Council Directive 94/62/EC
In addition, PROBoardMAX™ is not made using any ingredients or materials that are hazardous under OSHA
Hazard Communication Regulation. The ingredients and materials used in PROBoardMAX™ are considered
articles “which will not release or otherwise result in exposure to a hazardous chemical under conditions of
normal use”. As such, PROBoardMAX™ is exempt from labeling and MSDS requirements via regulation
subpart 2 of Part 1910, section 5, iv, c:
Articles: (definition) means a manufactured item which is formed to a specific shape or design
during manufacture which has end use function dependent in whole or in part upon its shape
or design during end use; and which does not release or otherwise result in exposure to
hazardous chemicals under normal conditions of use.
On behalf of PROTEX® Products;
_______________________________ 11.9.15
Brad Wells / Director of Operations Date
Brad Wells
Digitally signed by Brad Wells
DN: cn=Brad Wells, o=PROTEX
Products, ou=Operations,
email=info@protex-
products.com, c=US
Date: 2015.11.09 17:17:19 -06'00'