Instruction Manual

ENGLISH
7
One Year Limited Warranty
PROTO® torque wrenches are guaranteed for 1 year from the
date of purchase against any defect or manufacturing fault,
and 90 days for calibration accuracy. PROTO® accessories
and wear parts are covered by the legally enforced
guarantee. This guarantee does not cover the following
cases: normal wear, non compliance of instructions of
use and safety guidelines, nonconventional or abusive
use of the tool, tool overloading, lack of servicing or
maintenance, intrusion of foreign bodies, tools which have
been disassembled or modifed, or featuring traces of shock
(dents, cracks, broken covers, etc.), use with poor quality or
non-compatible accessories.
To use the guarantee, provide: the tool with its serial
number as well as the legible and unmarked original
invoice designating the product and its date of purchase.
Detailed conditions of application of the guarantee: call
your distributor. This lifetime warranty is subject to the
disclaimers and limitations described below, and is in
lieu of all other warranties, express or implied, including
the implied warranty of merchantability or fitness for a
particularpurpose.
This warranty gives you specific legal rights and you may
have other rights which vary in certain states orprovinces.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-800-8665
for a freereplacement.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
Register online at www.protoindustrial.com/register.
Limited Lifetime Warranty
Except as specified below, PROTO® Industrial Tools, a
business unit of Stanley Black & Decker, Inc. (“PROTO®”),
warrants any of its PROTO® branded products, including
products sold by PROTO® Industrial Tools that are marketed
as products “by PROTO®”, for the useful life of the product
against defects in material or workmanship.
For torque tools in need of repair and/or calibration,
products may be dropped off at any national DEWALT
Service Center or packed and shipped directly to one of our
three Torque Service Centers:
West Coast:
Factory Service Center
1015 North Market Blvd #2
Sacramento, CA 95834
East Coast:
Factory Service Center
6115 Jimmy Carter Blvd
Norcross, GA 30071
Central Region:
Factory Service Center
10245 W Little York Road
Houston, TX 77040
Defects in material or workmanship will be repaired or
replaced at no cost. All other repairs will be at a nominal
charge. Torque products are precise measuring devices
that require care in handling. PROTO® recommends that
all torque wrenches be recalibrated once a year or more,
depending on usage.