User's Manual

ManualsBrandsProto ManualsPaintballProto Matrix 6

Proto Paintball

USA

10637 Scripps Summit Ct. San Diego, CA 92131

P 858-536-5183 F 858-536-5191

EUROPE Unit 1, ZK Park, 23 Commerce Way

Croydon, Surrey CRO 4ZS United Kingdom

P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339

ASIA 3F-2, No. 287, Jung Jeng Rd., Luju Hsiang

Taoyuan 338, Taiwan (R.O.C.)

P +886-3-312-6540 F +886-3-311-8723

www.protopaintball.com

www.dyematrix.com

trademarks, trademarks, or design trademarks of DYE Precision, Inc.

Dye Precision, Inc. U.S. Patent # 5,613,483 and additional patents pending.

™

Summary of content (11 pages)

PAGE 1
™ ™ ™ Proto Paintball USA 10637 Scripps Summit Ct. San Diego, CA 92131 P 858-536-5183 F 858-536-5191 EUROPE Unit 1, ZK Park, 23 Commerce Way Croydon, Surrey CRO 4ZS United Kingdom P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339 ASIA 3F-2, No. 287, Jung Jeng Rd., Luju Hsiang Taoyuan 338, Taiwan (R.O.C.) P +886-3-312-6540 F +886-3-311-8723 www.protopaintball.com www.dyematrix.com Copyright ©2006 DYE Precision, Inc.
PAGE 2
MATRIX OWNER’S MANUAL W W W . P R O T O P A I N T B A L L . C O M TABLE OF CONTENTS QUICK REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE 02 IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
QUICK REFERENCE - USING YOUR MARKER WA R N I N G Air Supply - The MATRIX should be operated using air/nitrogen gas only. This air needs to be supplied to the Hyper2™ in-line regulator at a regulated pressure of no more than 850 psi. The Hyper2™ in-line regulator comes factory preset at 185psi. I M P O R TA N T S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S Gassing Up Your MATRIX - Screw in your air system to the on/off airport and turn the knob of the airport clockwise, all the way in.
PAGE 4
MATRIX BOARD - SETTINGS AND FUNCTIONS MATRIX BOARD - SETTINGS AND FUNCTIONS (CONTINUED) TURNING THE MATRIX ON AND OFF BOARD SETTINGS AND CONFIGURATION MODE To turn on the MATRIX, press and hold the upper button (see figure 1) until the LED light turns orange. The orange light indicates board bootup. After the bootup sequence, the LED will turn either RED (no ball) or GREEN (ball ready to fire). To turn the MATRIX off, press and hold the power button until the LED turns off.
PAGE 5
MATRIX BOARD - SETTINGS AND FUNCTIONS (CONTINUED) Configuration Mode - MATRIX BOARD - SETTINGS AND FUNCTIONS (CONTINUED) The following settings can only be modified in configuration mode. To activate the configuration mode, turn your marker off and set DIP switch 2 to the on position. Next, turn your marker on. The 3-color LED cycles through all colors for one second to indicate that you have entered the configuration mode. To cycle through different settings, pull and release the trigger.
PAGE 6
FUSE™ BOLT - ASSEMBLY AND MAINTENANCE FUSE™ BOLT - ASSEMBLY AND MAINTENANCE (CONTINUED) 4 3 2 BOLT MAINTENANCE Regular MATRIX Fuse™ bolt maintenance is vital to the performance of the MATRIX. If the Fuse™ bolt is not kept well-greased and the o-rings in good shape, the performance of the MATRIX will be greatly hindered. 1 FUSE™ BOLT OPERATION To achieve top performance from your MATRIX, it is important to understand the basic operation of the MATRIX’s patented FUSE™ bolt system.
PAGE 7
LPR (LOW PRESSURE REGULATOR) - ADJUSTMENTS AND MAINTENANCE LPR (LOW PRESSURE REGULATOR) - ADJUSTMENTS AND MAINTENANCE CHANGING THE SEAL RETAINER 5 9 5 5 1 2 3 4 3 7 2 8 1 6 4 LPR ASSEMBLY, CLEANING, TESTING AND CHANGING SEALS 5 Figure 1 WA R N I N G When servicing your marker: • Make sure your hopper is removed from the MATRIX. • Make sure there are no paintballs in the breech of the MATRIX. • Always remove the air supply and relieve all gas pressure in the MATRIX before disassembly.
PAGE 8
HYPER2™ IN-LINE REGULATOR - ADJUSTMENTS AND MAINTENANCE 2 3 1 7 5 ANTI CHOP EYES/ BALL DETENTS - MAINTENANCE AND CHANGING 11 9 7 13 10 8 12 6 4 14 USAGE Carefully connect your air hose from your bottle or air system to the Hyper2™ In-Line. The Hyper2™ In-Line is set by the factory to approximately 185psi. This pressure should give you a velocity of approximately 285fps. ADJUSTMENTS The output pressure of the Hyper2™ In-Line is adjusted by turning the brass seat housing.
PAGE 9
TRIGGER ADJUSTMENT AND ON/OFF AIRPORT MATRIX EXPLODED VIEW 15 ADJUSTING YOUR TRIGGER 3 PARTS LIST 1 The trigger’s forward travel and over travel are fully adjustable so that the user can finetune the trigger to his or her exact liking. • Remove the grip frame from the body of the MATRIX. • As you pull the frame away from the body, take care so as not to damage the wires running between the two parts. Be careful not to lose the trigger spring.
PAGE 10
TROUBLE SHOOTING GUIDE MATRIX WARRANTY INFORMATION MATRIX TROUBLE SHOOTING KEY : O-RING SIZE #000 WARRANTY O-RING HARDNESS PART NUMBER CORRESPONDING TO THE DIAGRAM UR70 (#) MARKER ISN'T WORKING THOUGH EYES ARE CLEAN AND ALL WIRES ARE CONNECTED; MARKER DOES WORK IF EYES ARE TURNED OFF AIR LEAK BETWEEN THE FRAME AND BODY - - First remove the frame and try to pinpoint the source of the leak: If it comes from the small hole under the LPR, you need to remove your LPR.
PAGE 11
™ ™ ™ Proto Paintball USA 10637 Scripps Summit Ct. San Diego, CA 92131 P 858-536-5183 F 858-536-5191 EUROPE Unit 1, ZK Park, 23 Commerce Way Croydon, Surrey CRO 4ZS United Kingdom P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339 ASIA 3F-2, No. 287, Jung Jeng Rd., Luju Hsiang Taoyuan 338, Taiwan (R.O.C.) P +886-3-312-6540 F +886-3-311-8723 www.protopaintball.com www.dyematrix.com Copyright ©2006 DYE Precision, Inc.