User's Manual

ManualsBrandsProto ManualsPaintballProto Reflex

Proto Paintball

USA 10637 Scripps Summit Ct. San Diego, CA 92131

P 858-536-5183 F 858-536-5191

EUROPE UNITED KINGDOM Dye House, 7-8 Commerce Way

Croydon, Surrey, United Kingdom, CR0 4XA

P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339

GERMANY Albert Einstein Str. 2 B

77656 Offenburg, Germany

P +49 (0)781 639 349 91

ASIA No. 253, Guojhong Rd., Dali City

Taichung County 412, Taiwan (R.O.C.)

P +886 (0) 4-2407-9135 F +886 (0) 4-2407-2090

www.protopaintball.com www.dyematrix.com

either registered trademarks, trademarks, or design trademarks of DYE Precision, Inc.

DYE Precision, Inc. U.S. Patent # 5,613,483, 7,594,503; 7,765,998. OTHER U.S. AND INT’L PATENTS PENDING.

Covered by one or more of the following U.S. Patents, 5,613,483; 5,881,707; 5,967,133; 6,035,843 and 6,474,326.

W W W . P R O T O P A I N T B A L L . C O M

2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 1

Summary of content (16 pages)

PAGE 1
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 1 Proto Paintball USA 10637 Scripps Summit Ct. San Diego, CA 92131 P 858-536-5183 F 858-536-5191 EUROPE UNITED KINGDOM Dye House, 7-8 Commerce Way Croydon, Surrey, United Kingdom, CR0 4XA P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339 GERMANY Albert Einstein Str. 2 B 77656 Offenburg, Germany P +49 (0)781 639 349 91 ASIA No. 253, Guojhong Rd., Dali City Taichung County 412, Taiwan (R.O.C.
PAGE 2
011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 3 R E F L E X R A I L™ OW N E R ’ S M A N U A L W W W . P R O T O P A I N T B A L L . C O TA B L E O F CO N T E N T S M - IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . PAGE 02 - QUICK START UP GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE 04 - REFLEX RAIL™ BOARD SETTINGS AND FUNCTIONS . . . . . . . .
PAGE 3
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 5 W A R N I N G IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES W A R N I N G IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES • The REFLEX RAIL™ marker is not a toy. Misuse may cause serious injury or death. • Never shoot the REFLEX RAIL™ marker at velocities in excess of 300 feet per second, or at velocities greater than local or national laws allow.
PAGE 4
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 7 QUICK REFERENCE QUICK REFERENCE USING YOUR MARKER USING YOUR MARKER QUICK START UP GUIDE Before playing with your new REFLEX RAIL™ paintball marker there are a STEP 4. ATTACHING GAS SOURCE few important steps to take. A. Make sure that then knob on the front of the ON/OFF airport is in the OFF STEP 1. BATTERY INSTALLATION position, do this by turning the knob ½ a turn counter clockwise. Now screw in your A.
PAGE 5
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 9 REFLEX RAIL™ BOARD RAIL™ BOARD SETTINGS AND FUNCTIONS TURNING THE REFLEX RAIL™ ON AND OFF To turn on the REFLEX RAIL™, press and hold the power button until the LED’s turn blue. The blue light indicates board boot up. After the boot up sequence, the LED’s will turn either RED (no ball) or GREEN (ball in breach, ready to fire). To turn the REFLEX RAIL™ off, press and hold the power button until the LED’s turn off.
PAGE 6
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 11 REFLEX RAIL™ BOARD REFLEX RAIL™ BOARD SETTINGS AND FUNCTIONS FIGURE 1 SETTINGS AND FUNCTIONS BOARD SETTINGS AND CONFIGURATION MODE There are five settings you can alter on the RAIL™ board with the DIPswitches inside the grip frame (see figure 1): ABS Anti Bolt Stick. Trigger Sensitivity This setting adjusts the delay between two trigger pulls. Dwell This is the time the solenoid is activated for.
PAGE 7
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 13 REFLEX RAIL™ BOARD REFLEX RAIL™ BOARD SETTINGS AND FUNCTIONS GREEN - Trigger Sensitivity Values 1 - 20 (factory default 5) Trigger sensitivity is the amount of time that the trigger has to be released before the next trigger pull is allowed. In some situations with too low of a value, the REFLEX RAIL™ can register more trigger than what was actually pulled. This can cause the REFLEX RAIL™ to auto, even in semi-automatic mode.
PAGE 8
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 15 REFLEX RAIL™ BOARD TRIGGER SETTINGS AND FUNCTIONS BATTERY The 9V battery will last for about 40,000 shots. Please be aware that there are substantial differences in performance between different brands of batteries. Use of high quality alkaline or lithium ion batteries is recommended for maximum battery life.
PAGE 9
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 17 REFLEX RAIL™ BOLT REFLEX RAIL™ BOLT ASSEMBLY AND MAINTENANCE ASSEMBLY AND MAINTENANCE The REFLEX RAIL™ BOLT is the main component of the REFLEX RAIL™ marker. In order to achieve the best possible performance of the REFLEX RAIL™ it is essential that the REFLEX RAIL™ BOLT is kept clean, well lubed and in good working order. The REFLEX RAIL™ BOLT should be cleaned and re-lubed after each day of use.
PAGE 10
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 19 REFLEX RAIL™ BOLT REFLEX RAIL™ BOLT ASSEMBLY AND MAINTENANCE ASSEMBLY AND MAINTENANCE MAINTENANCE The basic maintenance for the REFLEX RAIL™ BOLT is to clean all surfaces of dirt, broken paint or other debris, check for any wear and tear on the O-rings and change them if needed, and finally applying a thin coat of DYE Slick Lube on all surfaces.
PAGE 11
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 21 LOADERS AND FEED NECK AIR/NITROGEN LOADERS AND FEED NECK AIR / NITROGEN TANK OPTIONS AND INSTALLATION To achieve the maximum performance of the REFLEX RAIL™ you will need to use a motorized loader that force-feeds paintballs into the REFLEX RAIL™ marker, preferably the Rotor™ Loader. Using a slower motorized loader or a nonmotorized loader will work, but the rate of fire and performance will be reduced.
PAGE 12
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 23 HYPER3™ IN-LINE REGULATOR HYPER3™ IN-LINE REGULATOR ADJUSTMENTS AND MAINTENANCE ADJUSTMENTS AND MAINTENANCE VELOCITY ADJUSTMENT HYPER3™ REGULATOR DIS-ASSEMBLY INSTRUCTIONS The velocity of the RAIL™ is adjusted by adjusting the input pressure into the RAIL™. This is controlled with the Hyper3™ regulator. The Hyper3™ on the RAIL™ is factory set to 150 psi which will give you a velocity of about 285 FPS (Feet per Second).
PAGE 13
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 25 ANTI CHOP EYES/ BALL DETENTS ANTI CHOP EYES/ BALL DETENTS MAINTENANCE AND CHANGING MAINTENANCE AND CHANGING ANTI CHOP EYES The Anti Chop Eye (ACE) system will prevent the RAIL™ from chopping paint by not allowing the marker to fire until a ball is fully seated in front of the bolt. The eyes use a beam across the breech. On one side there is a transmitter, and on the opposite side a receiver.
PAGE 14
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:40 PM Page 27 AIRPORT TROUBLE SHOOTING GUIDE ASSEMBLY AND MAINTENANCE AIR LEAKS AIRPORT ADJUSTMENT AND MAINTENANCE The location of the airport adapter can be moved approximately 1 1⁄4” back or forward from the stock position to fit your individual preference. The Ultralite frame comes equipped with an integrated locking dovetail. There is a locking screw located on the bottom right side of the Ultralite frame.
PAGE 15
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:41 PM Page 29 TROUBLE SHOOTING GUIDE leak is coming from this hole, remove screw and apply thread sealant to it. Make sure to tighten the screw well and wait for sealant to dry before re-gassing marker. AIR LEAKING FROM FRONT OF THE REFLEX RAIL™ • Remove the Bolt kit from the marker and change the #017 O-ring located inside of the Can and the #014 O-ring located inside the Manifold. Lube well and re-assemble.
PAGE 16
2011-Reflex-RAIL-Manual.qx_2011-Reflex-RAIL-Manual 11/22/10 12:41 PM Page 31 2 EXPLODED VIEW RAIL™ WARRANTY INFORMATION 1 WARRANTY AND LEGAL INFORMATION 4 3 PARTS LIST 5 1 Clamping Feed Collar 2 Feed Neck Lever 12 3 Feed Neck 13 4 Ball Detent 8 5 Eye Pipe 15 7 6 Hyper3™ 7 “ACE” Eye 8 Solenoid 9 Front Frame Screw 9 10 Ultralite Frame 11 Rear Frame Screw 11 6 12 REFLEX RAIL™ Bolt 10 13 REFLEX RAIL™ Body 14 Airport 15 Solenoid screws 14 28 WARRANTY DYE Precision, Inc.