User's Manual

ManualsBrandsProto ManualsPaintballProto SLG 2008

™

Proto Paintball

USA 10637 Scripps Summit Ct. San Diego, CA 92131

P 858-536-5183 F 858-536-5191

EUROPE Unit 1, ZK Park, 23 Commerce Way

Croydon, Surrey CRO 4ZS United Kingdom

P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339

ASIA No. 253, Guojhong Rd., Dali City

Taichung County 412, Taiwan (R.O.C.)

P +886 (0) 4-2407-9135 F +886 (0) 4-2407-0125

www.protopaintball.com

www.dyematrix.com

either registered trademarks, trademarks, or design trademarks of DYE Precision, Inc.

DYE Precision, Inc. U.S. Patent # 5,613,483. OTHER U.S. AND INT’L PATENTS PENDING.

Covered by one or more of the following U.S. Patents, 5,613,483; 5,881,707; 5,967,133; 6,035,843 and 6,474,326.

Summary of content (16 pages)

PAGE 1
™ ™ ™ Proto Paintball USA 10637 Scripps Summit Ct. San Diego, CA 92131 P 858-536-5183 F 858-536-5191 EUROPE Unit 1, ZK Park, 23 Commerce Way Croydon, Surrey CRO 4ZS United Kingdom P +44 (0) 20-8649-6330 F +44 (0) 20-8649-6339 ASIA No. 253, Guojhong Rd., Dali City Taichung County 412, Taiwan (R.O.C.) P +886 (0) 4-2407-9135 F +886 (0) 4-2407-0125 www.protopaintball.com www.dyematrix.com Copyright ©2008 DYE Precision, Inc.
PAGE 2
S L G™ W O W N E R ’ S W W . P R O T O P A I N T M A N U A L B A L L . C O M TA B L E O F C O N T E N T S - IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . PAGE 02 - QUICK START UP GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE 04 - SLG™ BOARD SETTINGS AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE 06 - TRIGGER ADJUSTMENTS . . . . . . .
PAGE 3
 W A R N I N G IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES  W A R N I N G IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES • The SLG™ marker is not a toy. Misuse may cause serious injury or death. • Always chronograph the SLG™ marker before playing paintball. • Please read, understand and follow the directions in the SLG™ owner’s manual. • Never look into the barrel or breech area of the SLG™ when the marker is switched on and able to fire.
PAGE 4
QUICK REFERENCE QUICK REFERENCE USING YOUR MARKER USING YOUR MARKER STEP 4. ATTACHING GAS SOURCE Be sure there are no paintballs loaded in the breech of the SLG. If the bolt is in the forward position, a ball can be fired when gas enters the marker. Screw on a preset air system into the airport located on the bottom of the grip frame. Be sure the air system is screwed in all the way into the Airport.
PAGE 5
SLG™ BOARD SLG™ BOARD SETTINGS AND FUNCTIONS SETTINGS AND FUNCTIONS DIP switch 1, is used for factory reset/tournament lock. When it's OFF the gun is always set back to stock settings (semiauto, 15 bps, trigger sensitivity 5). BUTTONS AND LED LIGHT INDICATOR There are two buttons and an LED light indicator mounted inside the frame of the SLG™. These are accessible on the back side of the frame. The top button is used to turn the SLG™ ON and OFF.
PAGE 6
SLG™ BOARD SLG™ BOARD SETTINGS AND FUNCTIONS SETTINGS AND FUNCTIONS RED – RATE OF FIRE (VALUES 1-20) YELLOW – FIRE MODE (VALUES 1-4) The ROF setting is used to set the maximum rate of fire of the SLG™. The values do not correspond directly to a certain Balls Per Second (BPS) value. You will need to use the table below to locate your desired maximum ROF setting. The factory default is 8 (14.9 BPS). This setting is used both when the Eye function is turned on and off.
PAGE 7
SLG™ BOARD TRIGGER SETTINGS AND FUNCTIONS ADJUSTMENT BATTERY The Trigger’s forward travel and over travel are fully adjustable so that the user can fine-tune the trigger to his/her exact preference. The 9V battery will last for about 20,000 shots. Please be aware that there are substantial differences in performance between different brands of batteries. Use of high quality alkaline or lithium ion batteries is recommended for maximum battery life.
PAGE 8
SLG™ BOLT SLG™ BOLT ASSEMBLY BOLT TIP OPERATION RING BOLT BACK SOFT RUBBER CUSHION BACK CAP HOW IT WORKS BOLT PLUNGER At rest, when the bolt is in the rear position, there is a positive forward force on the bolt from the air pressure in the shot chamber. The bolt is held in the rear position by the sear. When the SLG™ is fired, the sear is dropped by an electro-magnetic solenoid.
PAGE 9
SLG™ BOLT SLG™ BOLT OPERATION AND MAINTENANCE O-RING TABLE 1 2 2 RE-COCKING / BLEED The SLG™ is equipped with a Pneumatic re-cocking system in case the bolt becomes jammed (pinching a ball). The button in the center of the bolt back can be pressed to send the bolt rearward and reset it for the next shot. The bleed button also serves as a gas vent for the dump chamber. It can be used to de-gas the SLG™ after the tank is removed, or to confirm that the SLG™ has gas and is ready for play.
PAGE 10
LOADERS AND FEED NECK AIR/NITROGEN OPTIONS AND INSTALLATION AIR / NITROGEN TANK OPTIONS AND INSTALLATION LOADERS AND FEED NECK To achieve the maximum performance of the SLG™ you will need to use a motorized loader that force feeds paintballs into the SLG™ marker. Using a slower motorized loader or a nonmotorized loader will work, but the rate of fire will be reduced. The SLG™ will only work with Compressed air or Nitrogen air systems such as the DYE Throttle air system.
PAGE 11
AIRPORT AIRPORT ASSEMBLY AND MAINTENANCE ASSEMBLY AND MAINTENANCE AIRPORT ADJUSTMENT AND MAINTENANCE The location of the airport adapter can be moved approximately 1 1⁄4” back or forward from the stock position to fit your individual preference. To change the position: 1. Open the three left side grip panel screws with a 3⁄32” allen key. 2. Remove the 9V battery. 3. Using a 3⁄32” allen key, loosen the airport locking screw until airport slides back and forth loosely. 4.
PAGE 12
HYPER3™ IN-LINE REGULATOR HYPER3™ IN-LINE REGULATOR ADJUSTMENTS AND MAINTENANCE ADJUSTMENTS AND MAINTENANCE VELOCITY ADJUSTMENT HYPER3™ REGULATOR DIS-ASSEMBLY INSTRUCTIONS The velocity of the SLG™ is adjusted by adjusting the input pressure into the SLG™. This is controlled with the Hyper3™ regulator. The Hyper3™ on the SLG™ is factory set to 145 psi which will give you a velocity of about 285 FPS (Feet per Second). A 3⁄16” allen key will be needed for this operation.
PAGE 13
ANTI CHOP EYES/ BALL DETENTS ANTI CHOP EYES/ BALL DETENTS MAINTENANCE AND CHANGING MAINTENANCE AND CHANGING ANTI CHOP EYES CLEANING THE ANTI CHOP EYES The Anti Chop Eye (ACE) system will prevent the SLG™ from chopping paint by not allowing the marker to fire until a ball is fully seated in front of the bolt. The eyes use a beam across the breech. On one side there is a transmitter, and on the opposite side a receiver.
PAGE 14
TROUBLE SHOOTING GUIDE AIR LEAKS AIR LEAKING FROM THE AIRPORT • Check the O-ring on the Air system. If needed change the O-ring and try again. The O-ring normally used is #15 but some manufacturers might use a different size. Consult the manual of the air system you are using. • Check that the hose connector is tight. Remove the hose from the connector by pushing the gray plastic towards the connector and pull out hose. Insert a 3⁄16” allen key into the connector and tighten.
PAGE 15
TROUBLE SHOOTING GUIDE correct connector (the microswitch connector is white and plugs into the white female connector on the board). • Change the battery if not positive about it’s charge. • Check that the solenoid cable is attached to the blue female connector on the board. TRIGGER BOUNCE / SLG™ SHOOTING MORE THAN ONE BALL PER PULL IN SEMI AUTOMATIC MODE • Raise the trigger sensitivity level in the configuration mode. • Check that the trigger is not adjusted too short.
PAGE 16
EXPLODED VIEW PROTO WARRANTY INFORMATION 1 WARRANTY AND LEGAL INFORMATION 2 12 WARRANTY DYE Precision, Inc. Warrants for one year to the initial retail purchaser, from the initial date of purchase, that the paintball marker and regulator are free from defects in materials and workmanship, subject to the requirements, disclaimers and limitations of this warranty. Disposable parts, normal maintenance and standard wear and tear parts such as batteries, o-rings and seals are not warrantied.