User Manual

SAFETY INSTRUCTIONS FOR MITER SAW STANDS

1. Use caution when folding or unfolding legs to limit any nger pinch points.

2. Place stand on at and level surface to keep from rocking or tipping.

3. Make sure that work support extensions (if included) are within safe operating limits, and

are properly locked in place before using tool. Do not exceed the rated capacity on main frame table.

4. Test the setup for stability before proceeding with work.

5. Be sure the miter saw is tightened securely at all mountings before folding the work station for transport.

FEATURES

Your Contractor Miter Saw Work Station is loaded with standard features all designed and

engineered to maximize the functionality and exibility of your Work Station.

STANDARD FEATURES

• Rapid Clamp Tool Mounts

• Adjustable Material Supports

• Wheels for for easy transportation

ASSEMBLY INSTRUCTIONS

Read all assembly instructions completely before attempting assembly.

ATTACHING THE WHEELS

See Figure 3

1. Using pliers, squeeze a C-clip over the inner grove closest to the miter

saw stand.

2. Place the wheel onto the axle and secure it using another C-clip toward the

end of the axle.

3. The C-clips should snap into place and hold the wheel onto the axle.

Step 1

Step 2

Step 3

FIG 3