Full Product Manual
Table Of Contents
- PRODUCT MANUAL Cover
- TABLE OF CONTENTS
- FEATURES AND SPECIFICATIONS
- PREPARING THE WORKSTATION
- INSTALLING THE TOOL HOLDERS / HANDLES
- ATTACHING SLIM PROFILE TOOL MOUNTS TO YOUR MITER SAW
- MOUNTING MITER SAW ASSEMBLY TO THE STAND
- REMOVING MITER SAW ASSEMBLY FROM THE STAND
- TRANSPORTING AND STORING THE WORKSTATION
- SAFETY AND WARNINGS
- GENERAL MAINTENANCE
- WARRANTY
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
ATTACHING SLIM PROFILE TOOL MOUNTS TO YOUR MITER SAW
NOTE: If your miter saw mounting holes DO NOT line up with tool mount slots and tool mounts
are not parallel to each other when mounted:
a. Make sure your miter saw is unplugged and saw arm is locked in the down position.
b. Mount miter saw to a mounting surface at least 3/4” thick using required bolts,
washers, and nuts for your miter saw.
c. Drill holes in mounting surface to match position of tool mount slots.
d. Proceed with installation.
13