Full Product Manual
Table Of Contents
- PRODUCT MANUAL Cover
- TABLE OF CONTENTS
- FEATURES AND SPECIFICATIONS
- PREPARING THE WORKSTATION
- INSTALLING THE TOOL HOLDERS / HANDLES
- ATTACHING SLIM PROFILE TOOL MOUNTS TO YOUR MITER SAW
- MOUNTING MITER SAW ASSEMBLY TO THE STAND
- REMOVING MITER SAW ASSEMBLY FROM THE STAND
- TRANSPORTING AND STORING THE WORKSTATION
- SAFETY AND WARNINGS
- GENERAL MAINTENANCE
- WARRANTY
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
TRANSPORTING AND STORING THE WORKSTATION
HANDLE
WHEELS
6. Use handles with built-in wheels on either side of chassis to transport workstation to
desired location.
SAFETY AND WARNINGS
SAFETY INSTRUCTIONS FOR WORKSTATIONS
1. Use caution when folding or unfolding legs to limit any finger pinch points.
2. Place workstations on flat and level surface to keep from rocking or tipping.
3. Do not exceed the rated capacity on main frame table/chassis.
4. Ensure load is equally distributed.
5. Test the setup for stability before proceeding with work.
6. Use only the slim profile mounting brackets included with this kit.
7. Do not sit or stand on workstations.
8. Never stack workstations to obtain extra height.
9. Remove miter saw before folding the stand for transport and storage.
18