User's Guide

WHERE#
3.2 Via tracking platform
www.protrack365.com
Ask your distributor for log-in account and password.
Basic 4
4.1 LED indication
4.1.1 Red LED -Power status
Slow flashing
Normal working (backup battery)
Solid bright
Normal working (external power supplying)
Off
Power off
4.1.2 Green LED -Network status
Quick flashing
GSM/LTE initialization
Slow flashing
Normal working with GSM/LTE network
Off
No GSM/LTE signal
4.1.3 Blue LED -GPS status
Quick flashing
Searching GPS signal
Slow flashing
Normal working with GPS fixed
Off
No GPS fixed
4.2 Power/ACC/Tele-cutoff (petrol/electricity) control line (4 pin)
4.2.1 The standard voltage is 9V-90VDC. Please use the power line which provided
by the manufacturer. The red line is the positive. The black line is the negative. The
negative should earth alone or link iron during installing. Do not connect it to other
ground wire.
4.2.2 ACC line (orange) is connected to the ACC switch of the vehicle. Please
make sure to connect the ACC line. The tracker will decide whether to enter
ignition detection according to ACC status. If do not connect to ACC line, the
device will enter ignition detection status. If the vehicle vibrates when moving, it will
activate the vibration alarm. If there is no need for the theft proof function,
connect the ACC line to the positive in parallel and keep high level.