Installation Guide

3D
3F
3G
3 I
3. Install The First Row
A.Cutthehorizontalspacersforeachcoursetot
inside the vertical perimeter channels.
B. Open the sealant as instructed on the tube. Cut
the nozzle at a 45° angle at the 1/4" mark.
C. Sealant will skin over in 15-17 minutes. Do not
apply sealant to more blocks than can be
installed in 10
minutes.
D. In the bottom channel
apply two beads of
sealant the full length
of the channel 1/4" in
from each side.
E. Place a glass block
in the side channel
and slide it into the
bottom channel.
F. Apply two 1/4" beads
of sealant behind the
raised edge of glass
block.
G. Press a vertical
spacer into place
next to the block.
H. Apply two 1/4" beads
of sealant behind the
raised edge of the
next glass block to
be inserted.
I. Insert sealant side
of next block tight
against the vertical
spacer and apply two
1/4" beads of sealant
behind the raised
edge of block.