User's Manual

23
Destination Name & Number
– CH1
CHANNEL 1 Destination Name and Number on the TVs
This section allows you to set which NAME and POSITION NUMBER each channel will take on your TVs
On the web interface select VCT
Select OUTPUT A on top, to configure NAME and Major/Minor Position number for the first Modulator
VCT MODE = Select CVCT ( Cable Virtual Channel Table mode )
TRANSPORT STREAM ID = DO NOT CHANGE as this is taken automatically from the other settings you did
Click DEL-ALL to clear any previous setting. This is also mandatory in case you change pids and references on the
encoders, so any eventual existing VCT must be refreshed