User's Manual

24
Destination Name & Number
– CH1
Click ADD = A POP-UP Window will open.
If the POP-UP does not open, please check your web browser pop-up blocker, or use another web browser as
internet explorer or firefox
MODULATION MODE = 4 ( digital tv type of service )
Default = 4
CARRIER FREQUENCY = Enter the frequency you are using for the modulator A on this unit
Default = 195.000
CHANNEL TSID = Channel Transport Stream ID – Taken automatically from the previous settings
Default = Automatically taken – DO NOT CHANGE
PROGRAM NUMBER = Taken automatically from the previous settings
Default = Automatically taken – DO NOT CHANGE
SHORT NAME = These are the “ CALL LETTERS “ or Name which pops-up on the TV screens when this channel is
selected. As example : DirecTV1 or BluRay-1 Or APPLE or the station name or any lable
Default = HD1 ( you can change this to your favorite name for this channel )
MAJOR CHANNEL NUMBER = This is the main position number this channel will take on all TVs
As example, if you set number “ 1 “, this program will be stored by all TVs to position number 1 on the remote controls
The combination of this Major number and the following Minor number makes the final position for this channel on the
tv channels lineup.
If another channel is existing on 1, there will be TWO sequential channels numbered 1 on the TVs
Default = 1
MINOR CHANNEL NUMBER = This is the sub position number this channel will take on all TVs under the Major position.
As example, if MAJOR number is set to 1, and this Minor number is also set to 1, this channel will be stored by the TVs on
position 1.1
You can also modify the Minor number to any value so this channel will sequence as wanted within multiple channels
available with the MAJOR NUMBER = 1
Default = 1
SOURCE ID = Taken automatically from the previous settings
Default = Automatically taken – DO NOT CHANGE
When Done > CLICK SAVE