User's Manual

35
ASI Out VCT configuration
ASI OUT VCT Configuration ( option )
If you do not plan to use the ASI DATA out, skip this step
On the web interface select VCT
Select OUTPUT E on top, to configure NAME and Major/Minor Position number for the ASI DATA out
VCT MODE = Select CVCT ( Cable Virtual Channel Table mode )
TRANSPORT STREAM ID = DO NOT CHANGE as this is taken automatically from the other settings you did
Click DEL-ALL to clear any previous setting. This is also mandatory in case you change pids and references on the
encoders, so any eventual existing VCT must be refreshed