User's Manual

36
ASI Out VCT configuration
Click ADD = A POP-UP Window will open.
If the POP-UP does not open, please check your web browser pop-up blocker, or use another web browser as
internet explorer or firefox
The ASI OUT is a multiplex, so all the 4 ENCODERS will be configured at once
MODULATION MODE = 4 ( digital tv type of service )
Default = 4
CARRIER FREQUENCY = Enter the frequency you are using for the ASI out on this unit, or just one
Default = 195.000
CHANNEL TSID = Channel Transport Stream ID – Taken automatically from the previous settings
Default = Automatically taken – DO NOT CHANGE
PROGRAM NUMBER = Taken automatically from the previous settings
Default = Automatically taken – DO NOT CHANGE
SHORT NAMES = These are the “ CALL LETTERS “ or Name which pops-up on the TV screens when this channel is
selected. As example : DirecTV or BluRay Or APPLE or the station name or any lable
Default = HD4 / HD2 / HD3 / HD4 ( you can change this to your favorite name for this channel )
MAJOR CHANNEL NUMBERs = Destination position numbers on the TVs channels lineup
Default = 1
MINOR CHANNEL NUMBERs = This is the sub position number these channels will take on all TVs under the Major
position.
Default = 1 / 2 / 3 / 4
SOURCE ID = Taken automatically from the previous settings Default = Automatically taken – DO NOT CHANGE