User's Manual

38
IPTV Streaming out
IPTV STREAMING OUT Configuration ( option )
If you do not plan to use the IPTV out, skip this step
Onn the web interface select IP OUTPUT
Copy the values and selections as on the picture for a perfect operation
See the MULTICAST IP STREAMING GUIDE from the USB Memory pen about
how to use and implement the IP Streaming
IP OUT ENABLE = Enable or disable the ip streaming traffic out for each of the encoders from the IPTV RJ45 port
on the rear panel.
Important : The M check box ( on the right ) is the clone of the ASI out, with Multiplexed streams.
Keep this check box unselected to prevent high traffic on the IP Network, unless you need to deliver the MPTS stream
( multi program transport stream ) for a specific application
Default = 1/2/3/4 Selected - M Unselected
FILTER NULL PKT = Enable or disable the filtering of the Null Pakets on each output stream
Default = 1/2/3/4/M Selected
OUTPUT SPTS 1 = Set the MULTICAST ADDRESS and Port and type of protocol for the IP Stream from the first channel
encoder
Default = 224.2.2.2 port 1001 protocol RTP/RTSP
OUTPUT SPTS 2 = Set the MULTICAST ADDRESS and Port and type of protocol for the IP Stream from the second
channel encoder
Default = 224.2.2.2 port 1002 protocol RTP/RTSP