User's Manual

42
ASI Input
4) INPUT PROGRAM = The list on the left shows the found services from the ASI input. Check the ones to add to the
output currently selected on top ( A B C D ), then click SELECT PROGRAM to add it to the output list on the right
related to the selected output ( A B C D ) on top
5) CHECK THE BITRATE OF THE CURRENT OUTPUT ( A B C D )
when adding an external channel to the output the total bitrate shall not exceed the maximum allowance
of each modulator ( a b c d ) otherwise all channels with that modulator will not be receivable.
To check the current bitrate status of each modulator, check on the welcome web page on the menu,
the maxout bitrate and the current bitrate, as well the overflow green/red dot alarm
OTHER FEATURES :
a) Right Click on the right list component to change PIDS, names and values
b) Cancel program button, to remove from the right list the selected items
IMPORTANT : when you add to the output external channels, you will need to DELETE and ADD again the VCT virtual
channel table for the selected output ( A B C D ) in order to specify the destination channel names and numbers for
all the new added services to the output