User's Manual

45
NETWORK
NETWORK
Use this function to change the REMOTE CONTROL network address of the unit.
WARNING : DO NOT CHANGE THIS PARAMETER UNLESS YOU NEED TO
This whole manual refers to the unit default address 192.168.0.136, and if you change your address,
please make sure to write it on this manual too, so in future you will be able to recall the current address to
point the web browser
Improper setting of this parameter might result with loss of control of the unit, and the only solution is the general reset
from the physical front panel menu, accessing the menu via front panel button EN/SAVE > then options 6 SYSTEM > 6.3
FACTORY RESET