User's Manual

Pro Video Instruments
VeCOAX Ultra RF Series user Manual
13
ISDBT
These are the Defaults and Good
starting point for PLUG N PLAY
setup.
If you have more than one unit
please ensure you change the
FREQUENCY, KEY ID, and SHORT
NAME so they don’t overlap and
create issues.
• SOURCE – Set your Video Source HDMI, CVBS, or
SDI depending on your model
• STANDARD – Set your TV standard depending on
your needs, location, and support format of your
TV.
• FREQ – Set your Frequency using our Frequency
chart on page 53. TVs will scan for the Frequency
and the Frequency Channel it relates to.
• VID QUALITY – Set the Latency Mode of your
Video.
• KEY ID – Set your Key ID channel number.
• SERVICE NAME – Name of the Channel you wish to
use. 4-6 Characters max depending on TV.
• AUDIO FORMAT – Set your desired Audio Format.
AAC is the default standard for ISDBT.
• ADVANCED – Advanced options for users who
require Specific PIDs or Fixed EDID information.
Please don’t change these unless you understand
your required PIDs or EDID per Cable Provider
instructions or PVI Tech Support request.