User's Manual

Pro Video Instruments

VeCOAX Ultra RF Series user Manual

DVB-T GENERIC

These are the Defaults and Good

starting point for PLUG N PLAY

setup.

If you have more than one unit

please ensure you change the

FREQUENCY, LCN, and SHORT

NAME so they don’t overlap and

create issues.

• SOURCE – Set your Video Source HDMI, CVBS, or SDI

depending on your model

• STANDARD – Set your TV standard depending on

your needs, location, and support format of your TV.

• FREQ – Set your Frequency using our Frequency

chart at www.pvisupport.com. TVs will scan for the

Frequency and the Frequency Channel it relates to.

• VID QUALITY – Set the Latency Mode of your Video.

• MOD – Modulation Mode you wish to use. QAM64 is

the default and works with 99% of TVs

QAM256 is used in applications that require it such

as with other coax systems that use QAM256 or only

support QAM256 mode

• LCN – Logical channel number can be set here. This

is the channel number that will be stored and

displayed on the TV

• SERVICE NAME – Name of the Channel you wish to

use. 4-6 Characters max depending on TV.

• AUDIO FORMAT – Set your desired Audio Format.

MPEG is the default for DVB-T.

• ADVANCED – Advanced options for users who

require Specific PID’s or Fixed EDID information.

Please don’t change these unless you understand

your required PIDs or EDID per Cable Provider

instructions or PVI Tech Support request.