User's Manual

Pro Video Instruments

VeCOAX Ultra RF Series user Manual

DVB-C

These are the Defaults and Good

starting point for PLUG N PLAY

setup.

If you have more than one unit

please ensure you change the

FREQUENCY, LCN, and SHORT

NAME so they don’t overlap and

create issues.

• SOURCE – Set your Video Source HDMI, CVBS, or SDI

depending on your model

• STANDARD – Set your TV standard depending on

your needs, location, and support format of your TV.

• FREQ – Set your Frequency using our Frequency

chart at www.pvisupport.com. TVs will scan for the

Frequency and the Frequency Channel it relates to.

• SYM. RATE – Set the Symbol Rate appropriate for

your region.

• VID QUALITY – Set the Latency Mode of your Video.

• MOD – Modulation Mode you wish to use. QAM256

is the default for DVB-C

• LCN – Logical channel number can be set here. This

is the channel number that will be stored and

displayed on the TV.

• SERVICE NAME – Name of the Channel you wish to

use. 4-6 Characters max depending on TV.

• AUDIO FORMAT – Set your desired Audio Format.

MPEG is the default format for DVB-C.

• ADVANCED – Advanced options for users who

require Specific PID’s or Fixed EDID information.

Please don’t change these unless you understand

your required PID’s or EDID per Cable Provider

instructions or PVI Tech Support request.