User's Manual

Pro Video Instruments
VeCOAX Ultra RF Series user Manual
22
WEB INTERFACE
To log in: Open an internet browser window on your connected PC and navigate to the IP address of
the unit. DEFAULT IP ADDRESS: 192.168.0.136
Once you have logged into the unit, you will see the SETTINGS page. This will display all your inputs, as
well as your video standard, frequency, and other settings.
On the left-hand side, there is a navigation bar, where you can select different menus for further
configuration.
SETTINGS: Here you can change your broadcast settings for each channel of your unit,
including the broadcast standard and frequency.
PRESET: Here you can save multiple presets and come back to load them for future use. Up to
10 presets can be saved on a single device.
NETWORK: Here you can change the IP address, subnet mask, and gateway for accessing the
web interface, as well as whether the unit uses DHCP.
UPDATE: Here you can apply firmware updates to your unit, which will be distributed over our
support site, pvisupport.com.
ABOUT: Here you can find the unit’s firmware version.