User's Manual

Pro Video Instruments
VeCOAX Ultra RF Series user Manual
23
WEB INTERFACE – SETTINGS
SETTINGS: Under the settings menu you can modify the settings of each channel 1-8 just as
you would on the front panel of the unit. (Labelled MB1 – MB8) You can modify the following:
Source: Currently only HDMI is selectable
Standard: select the TV standard format you wish this channel to broadcast on. J.83B Cable,
ATSC, DVB-T, ISDB-T, etc.
RF Frequency: Enter the broadcast frequency that corresponds to your physical channel. (See
the Channels Appendices for more info.)
Video Quality: Change the video latency mode which is explained on Page 18.
Modulation Mode: Change between the modulation modes for certain formats such as J.83B,
DVB-T, and ISDB-T
Major: First Number displayed on the TV as a reference 1.
Minor: Second number used to ID the channel as a subcategory such as 1.2 or 1.3. Normally
used for setting multiple channels to the same channel number such as 10.1, 10.2, etc.
Short Name: Name of the channel (e.g. ESPN, DVD, FOX, etc).
Audio Format: Change the audio format of the channel. AC3 is recommended for USA, Canada,
Mexico. Please ensure your HDMI source is set to Stereo PCM audio