User's Manual

Pro Video Instruments

IP STREAMING FRONT PANEL

The unit is equipped with two network ports. Net 1# and Net #2.

Net #1 is used for SPTS- Single Port Transport Streams or One channel per set IP

Net #2 is the MPTS-GEN2 – Multiport Transport Stream – All channels output on one

IP address as a multicast stream.

We can control the MPTS-GEN2 port here under

IP Stream

Choose which Module to export all its information or channels as a Single Multicast

Stream on the Output IP you have set here. Remember this IP address is a Multicast IP

that streams under the IP address set in the

Network Settings

of the unit. Ex: IP set as

192.168.2.136 Mod 1 Exports under the multicast IP as 224.2.2.2:2001. If you don’t

understand Multicast IP’s please refer to your IT tech or read up on some information

available online.

We can choose the Output Protocol as well. UDP/RTP/RTSP

If you wish to do SPTS - Single Port Transport Stream - please refer to

Stream Connect

for this function.