hae Table of Contents C. statement important safeguards 1. Introduction 1.1 General Information 1 1.2 Features 1 1.3 Cheek list... 2 Installing the monitor 2.1 Power cable connection 3 cable connection. 2.3 Microphone and speaker cable connection. 2.4 Power ONL. 2.5 Self test pattern... 2.6 Adjust the picture, Operation 3.1 Power ON/OFF switch 1.2 Power (DIMS) indicator. 6 3.3 Using the volume and OSD control 6 3.4 OSD menus 8 3.5 Volume mute 2 3.6 Built in Microphone. 12 2 3.7 Safety protection 12 3.
FEDERAL COMMUNICATIONS This equipment has been tested and found to comply with the limits of a Class B digital device. Pursuant to Pact 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 3 residential installation.
7 IMPORTANT SAFEGUARDS Warnings: Read all of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning, Do not use liquid cleaners ov parasol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 5. Do not use this monitor near water. For example near a bathtub, washbowl, Kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, lee. 6.
(2.For added protection for this monitor, when it is let unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the monitor due to power-line surges. 13.Do not overload wall outlets and extension cords as this can result into fire or electric shock.
introduction .1 General Information This monitor is a high-performance intelligent multi scan color monitor. It is designed to be compatible with all display modes between kHz and 95K Hz for 17-inch monitor (Model No:795), kHz and 98K Hz for 19-inch monitor (Model No0:998), 30K iz and kHz for 17-inch monitor (Model No:785) / 19-inch monitor (Model No:985). The OSD control allows you to easily and simply make precise screen format adjustments, while user improbability provides cross platform compatibility.
13 Bl 5 country language on OSD which you can choice, it includes English, Spanish, German, France, Chinese, BE Built-in microphone to optimize speakerphone functionality. Cheek list Before operating this monitor, please make sure that all of the following items are included: I your monitor HM Microphone cable Ml This user's manual WM Power cord If any of these items are missing, please contact your dealer for technical support and customer service.
_t Power cable connection Plug power cord into the power supply of PC or into the wall outlet of the power. A three wire cord is provided as a safety precaution to ensure proper electrical grounding. 2.2 Signal cable connection The monitor has an built in signal cable with a male 15-pin mini D-sub connector. Almach this connector to the female 15-pin receptacle of your video adapter and lock the two screws lo ensure firm grounding. 2.
3.DC 15V output (optional) : DC 15V/250mA The DC 15V output provides power only for multimedia speaker. To connect the DC 15V output from monitor to speaker sets. (MODEL NO.: E-10 optional) “a Connecting the speakers and speaker cables NOTE: How to attach and connect the optional speakers to your monitor. Please refer to the user’s manual of speakers.
Vr 2.4 2.6 Ewer ON Switch on the monitor’s main power switch and your computer power. the monitor is standby and LED light up orange. Turn on soft power switch, the LED light up green. If the LED become to orange, check the video cable connection. Self test pattern The monitor may display a blue, green and red test pattern. This is to indicate that the monitor is functioning properly, but the computer’s video signal is not reaching the monitor.
3. Operation The front control panel is shown in the following illustration. One key model Four key mods} 3.1 Power ON/OFF switch This button is used to turn the monitor on and off. 3.2 Power (DIMS) indicator This indicator lights up green when the monitor operates normally. If the monitor is in DIMS (Energy saving) mode (stand-by / suspend / power off), this indicator color changes to orange 1.3 Using the volume and OSD control This OSD control knob is a multi-function controller. 1.
2.Please following the procedure of selection and adjusting an item using the OSD system as below steps for main functions adjustment. a. For one key model Step 1 : Press and release the OSD control knob to activate the OSD menu. Step 2: Turn the knob to scroll the pink highlight through the main-functions list. Step 3 : When the desired function is highlight, press and release the knob a second time. The sub-menu (second page) will be appear nearby main menu. Step 4 : Press and release the knob again.
7 Step 6: Step 7: Step 8: Step 9: To make your adjustments, press “+7 key ta increase or press key to decrease the setting. Press “Menu” key again to store the change. The scroll bar will change to black. You can select other function to make adjustments. Also you can select EXIT icon and press “Menu” key again to go back main menu. Repeat steps 2 through 7 to make further adjustments. Press “EXIT key in any step, you can exit the OSD menu. 3.4 OSD menus 1.
eee y EXIT: Exits the OSD controls. (Turning off the OSD window.) There are have addition information in the top and bottom of main menu. The descriptions as below. a. Factory preset modes indicator When the symbol appears on the top of menu between “main” and “function”. It’s meaning of the resolution modes from your computer’s was same as monitor preset modes by factory. All of the image status will be return to original setting by factory. b. If the symbol is not appear.
b. ADJUSTMENT 5 H-POSITION ©) H-81ZE £ V-POSITION (4) v-SIZE EXIT — + BEE) GEOMETRY ~ ADJUSTMENT 3 PINCUSHION 3 TRAPEZOID J PARALLEL C3 UNBALANCE 3 ROTATION EXIT = H-POSITION : To moves the picture image horizontally left or right. H-SIZE : To increases or decreases the horizontal size of the image. V-POSITION : To moves the picture image vertically up or down. V-SIZE : To increases or decreases the vertical size of the image.
d. COLOR ADJUSTMENT 9300°K COLOR 6500°K COLOR RED GREEN BLUE EXIT EE ¢. OSD LOCATION This control adjusts the color temperature of the screen image. 9300°K and 6500°K. are preset by factory. You can not to adjustment. 9300°K : Which is bluer and brighter. 6500°K : Which is redder and closer to paper white. RED/GREEN/BLUE : USER COLOR You con adjusts the individual color gun intensity by yourself. Increases or decreases red, green, or blue depending upon which is selected.
f. LANGUAGE LANGUAGE This control allows the user to choose dW the language in which the control -ENGLISH names are displayed LIFESPAN EUTHENICS FRANCIS 1.5 Volume mute(optional function) VOLUME MUTE This control turns the speakers and + headphone terminal sound ON and PEE) OFF. 3.6 Built-in Microphone Built-in microphone to optimize speakerphone functionality, When used with multimedia computers. 3.7 Safety protection The safety protection function is protect of the monitor.
that cover most of the common video modes supported by popular graphics adapters. If the monitor recognizes one of the preset timing signals, it will recall that mode and any stored display adjustments you have made. Standard Resolution Horizontal Vertical Frequency Frequency (KHz) (Hz) IBM/VGA 640X400 31.47 70 IBM/VGA 640x480 31.47 60 VESTS 640X480 37.50 75 VESALIUS §00 xX 600 37.88 60 VESALIUS 800 x 600 48.08 72 VESALIUS 800 X 600 46.88 75 IBM/XGA 1024 X 768 48.39 60 VESALIUS 800 X 600 53.
7 connection of the monitor and select the appropriate display resolution. 3.10 Power management This monitor meets VASE DIMS (Display power management signaling) standards, and complies with both the EPA’S energy star requirements and Europe’s TCO NUTPICK'S power management requirement. The following is the description of the power indicator for the power saving modes. A indication of the OSD window will shown on the screen of the monitor.
ww 4. Technical Information 4.1 Products Specifications consumption(max.} Picture Tube Disgruntle 17 INCH 19 INCH vis mage area 15.70 tees 1790) bees Active Display Area 300X225 mm 360X270 mm (Factory setting) 1181 X 8.85 inches 17 X1063 inches Synchronization Lance Horizontal 30-kHz (Model No: 795) 30-kHz Model Na 598) 30-kHz (Model No:785) | Notions) Vatican 50-150Hz S-150Hz Max. Resorption 16007 1200 1600.X 1200 Mx.