IP Camera User Manual Please read this instruction carefully for correct use of the product and preserve it for reference purposes
PROVISION-ISR BX-380IP User Manual 720P Professional IP Box Camera For H.
Cautions Before operation, we strongly advise users to read this manual and keep it properly for using later. Please use the specified power supply to connect. Avoid from in correct operation, shock vibration, heavy pressing which can cause damage to product. Do not use corrosive detergent to clean main body of the camera. If necessary, please use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for high grade furniture is applicable.
Contents 1 2 3 4 5 Introduction .................................................................................................... 1 1.1 Overview .................................................................................................. 1 1.2 Package ..................................................................................................... 1 1.3 Side Panel for IP-CAM ............................................................................ 1 1.4 Rear Panel Connection ...........
.4.1 Motion Detection Area ............................................................. 16 5.4.2 Motion Detection Trigger ......................................................... 17 5.4.3 Motion Detection Schedule ...................................................... 18 5.4.4 Alarm Input Trigger .................................................................. 18 5.4.5 Alarm Input Schedule ............................................................... 19 5.4.6 Alarm Out................................
C Ch haap ptteerr 11 IIn nttrro od du uccttiio on n 1 Introduction 1.1 Overview This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It adopts state of the art video processing chips. It utilizes most advanced technologies, such as video encoding and decoding technology, complies with the TCP/IP protocol, SoC, etc to ensure this system more stable and reliable. This unit consists of two parts: the IP-CAM device and central management software (short for CMS).
C Ch haap ptteerr 11 IIn nttrro od du uccttiio on n When it still fails to realize focusing after having confirmed the correct lens interface, the back focus adjustment may be required. Operate the following steps: tighten the lens firstly and then loose the fixed back focus ring; rotate the lens slowly until the video image turns to be clear, and finally tighten and lock the back focus ring.
C Ch haap ptteerr 22 IIn nssttaallllaattiio on n 2 Installation 2.1 Wall Mounting Step 1: Rotate the lens clockwise onto the lens mount of the camera. Step 2: Plug the wire of auto iris lens to the auto iris interface of the camera. Step 3: Connect the power supply and video output. Step 4: Attach the mounting block to the bracket and then install the bracket to the wall and tighten the screws to fix it as shown below.
C Ch haap ptteerr 33 IIEE C Co on nn neeccttiio on n 3 IE Connection User can connect IP-CAM through LAN or WAN. Here only take IE browser (6.0) for example. The details are as follows. 3.1 LAN In LAN, there are two ways to access IP-CAM:①Access through IP-Tool;② Directly Access through IE Browser. 3.1.1 Access through IP-Tool Step 1: Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from the CD. Step 2: Use IP-Tool to modify the network of IP-Cam.
C Ch haap ptteerr 33 IIEE C Co on nn neeccttiio on n For example, the network segment of this computer is 192.168.13.57. So, please modify the IP address, Subnet Mask, Gateway of IP-Cam which must be in the same network segment with the computer. After modifying, please input the user name and password and then click “OK” button to save the setting. Note: The default user name is: admin. The default password is: 123456. The new IP address of this device will display as follows after modification.
C Ch haap ptteerr 33 IIEE C Co on nn neeccttiio on n Input User name and password and then click “OK” button to login. Note: User also can use the modified IP address of the IP-Cam. Input the IP address in the IE browser bar and then click “Enter” to access IP-Cam. The default user name is admin. The default password is 123456. 3.1.2 Directly access through IE The network service is default as shown below: IP address: 192.168.226.201 Subnet Mask: 255.255.255.0 Gateway: 192.168.226.
C Ch haap ptteerr 33 IIEE C Co on nn neeccttiio on n IE browser will download Active X control automatically. Step 3: After downloading Active X control, the login dialog box will pop up as below: Step 4: Input user name and password in the login dialog box and click “OK” button to enter into the live interface. You can manage and setup the IP-CAM, such as change IP address etc. 3.
C Ch haap ptteerr 44 R Reem mo ottee P Prreevviieew w 4 Remote Preview 4.1 Remote Preview After you log in, you will see the following window. The descriptions of the icon on the remote preview interface: Icon Description Sensor alarm indicator icon Icon Description Full screen Motion alarm indicator icon Fix size Actual size Start/Stop record Playback Snap Zoom in Talk Zoom out Open/close audio Right click mouse to appear a pull-down list as shown above: Stream: Two options.
C Ch haap ptteerr 44 R Reem mo ottee P Prreevviieew w Button Description to rotate the dome upwards; to rotate the dome towards left; right; to rotate the dome downwards; to rotate the dome towards to stop rotating the dome. Drag the scroll bar to adjust rotating speed of the dome. Focus button. Click button to have long focus and click have short focus so that you can adjust the image clearly. Zoom button. Click the image. to zoom in the image; click to zoom out Iris button.
C Ch haap ptteerr 44 R Reem mo ottee P Prreevviieew w User can snap multiple pictures. Select the picture number from Frame pull down list box, such as 2, and check “Title” and “Time” to show capture title and time on the snap pictures simultaneously. Click “Browse” to set saving path; Click “Save” to save pictures to HDD on the computer; Click “Printer setup” to set the printer and print the snap pictures; drag the scroll bar to view all snapped pictures.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 5 Remote Configuration Functions of remote configurations include: System Configuration, Video Configuration, PTZ Configuration, Alarm Configuration, Network Configuration and Advanced Configuration. You should firstly select the menu on the left, and then setup the relative parameters. When one user configures parameters of a certain device, other users can not setup this device. 5.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 2. Select “Modify Time ", user can self-define time. Choose the right "Time Zone" according to user’s location. 3. User can also enable DST and set DST mode and time. 4. User can setup time by select the “Synchronize with NTP Server”. 5. Press the "Save" button to save the settings. 5.1.3 SD Card Setting steps: 1. Enter into "System Configuration" “SD Card” as shown below: Click “Format SD card” to format SD card.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 5.2 Video Configuration Camera Configuration includes four submenus: Camera Configuration, Video Stream, Time Stamp and Video Mask. 5.2.1 Camera Configuration Setting steps: 1. Enter into "Video Configuration " "Camera" interface as shown below: 2. Adjust Brightness, Contrast, Hue and saturation of the picture. 3. Select white balance mode. 4. Sharpen, denoise, frequency, CVBS format and day-night are adjustable. 5.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Here you can set date format and the position of the time stamp shown in the live image. 5.2.4 Video Mask You can set 4 mask area at most. Enable the mask, select color and transparent of the mask area and then drag the mouse to set the mask area. This will take you see a gridding area. After that, click “Save” button to save the settings. Then you will see a mask area on the live image. 5.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 2. Tick off “Enable/Disable PTZ Config”, and then reboot IE client side, the PTZ control panel will be displayed on the live interface. 3. Select the protocol of the PTZ device at the "Protocol" pull down list. 4. Input address of the PTZ in the "Address" textbox. 5. Select baud rate of the PTZ in the "Baud rate" pull down list. For the settings of protocol, address and baud rate please refer to the user manual of the PTZ setting. 5.3.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Click “Add” button to add cruise. Choose a cruise and click “Modify” button to pop up a window as below: Click “Add Preset” button to pop up a window. You can add the preset there. Click “Preview” button to check the related information of this cruise and click “Delete” button to delete this cruise. 4. Press the "Save" button to save the settings. 5.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 2. Move the "Sensitivity" scroll bar to setup the motion trace sensitivity. 3. Check the "Add”, press the "Ctrl" button and move mouse to select the motion detection area; Select “Erase” and move the mouse to clear all motion detection area. 4. Press the "Save" button to save the settings. 5.4.2 Motion Detection Trigger 1. Enter into “Alarm Configuration" "Motion Detection Trigger" to display a interface as below: 2.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Trigger FTP: If “Uploading picture” is checked, the triggered snap pictures will be sent into FTP server address. Please refer to FTP configuration chapter for more details. 5. Press the "Save" button to save the settings. 5.4.3 Motion Detection Schedule A window will show as below by entering into “Alarm configuration" "Motion Detection schedule" menu.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 2. Select the sensor at the "Sensor" pull down list and set the sensor name and alarm type: NO and NC. 3. Enable alarm and select alarm holding time. 4. Set alarm trigger options. The setting steps are the same with that of motion detection trigger. Please refer to motion detection trigger chapter for details. 5. Apply settings to all by clicking “Copy” button, which can quickly set the same settings for all sensors. 5.4.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Motion Detection Schedule chapter for more details 5.4.6 Alarm Out 1. Enter into “Alarm configuration""Alarm output" as shown below: 2. Select alarm holding time and alarm name at the "Alarm out” and “Alarm holding time” pull down list box respectively. 3. Press the "Save" button to save the settings 5.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 4. PPPOE: User needs to manual input the user name and password for dial-up internet. Firstly, user needs to login IE clients, then enter into user name and password of PPPoE, save the setting and exit. Secondly, setup IP address change notice. Thirdly, connect with Modem, then the device will dial-up internet automatically. 6. Press the "Save" button to save the settings. 5.5.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 4. Input the only device ID of the IP-CAM or user-defined name. And then input user name and password. 5.5.4 Server Configuration Enter into “Network Configuration” “Server Config”. 1. Check “Do you want IP Camera to connect Server. 2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Then enable the auto report in the ECMS/NVMS when adding a new device.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n with DDNS username and password. Provision ISR now allows you to use our mint DDNS server in order to create a virtual address for your DVR/NVR/IP-Camera on the internet. Each account is limited to 35 different addresses using your preferred domain name address instead of using IP addresses. Follow the steps below to register your DVR's name and to configure your DVR to use Provision ISR's Mint DDNS server.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 4) If there is no problem with the domain registration you will see the following message: “Your domain was successfully created.” If you do not see this message, the domain name you requested is already in use and you will be requested to provide an alternate domain name (please note: domain name is sometimes called host name).
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 1. Apply the Domain Name (Take dns2p for example) (1) Register in the Web Register dialog box Step 1: Fill in the blank of IE address with ‘www.dns2p.com’. Step 2: Click to enter the website. Step 3: Click "New User" in the right of homepage to register. For example: User ID is ‘abc’, and password is ‘123456’. The register dialog display as above. (2) Login Step 1: Return to homepage after registering successfully.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Step 3: Click "Submit" button, the system will pop up a dialog box to show that the domain is added successfully. Note: Time of probationary period is one month. If user wants to use it continuatively after one month, please Step 4: click "Buy Now" in the right of homepage to pay for it. 2. Setup in the IP-CAMERA ⑴ DOMAIN Domain is set in ‘1. Apply the Domain Name’. According to the example above, the domain is ‘WWW. IP-CAMERA.dns2p.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Application: This device supports VLC player. You can upload the VLC player in the related website and then select “File””Open URL” from the tool bar of the player. You will see the live image which is the same with that of playing through IE. 5.5.8 UPNP Enter into “Network Configuration” “UPNP” interface as shown below: Select “Enable UPNP” and then input friendly name.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 1. From Email: sender’s e-mail address 2. User name and password: sender’s user name and password 3. Server address: SMTP name of sender 4.Select the secure connection type at the Secure Connection pull down list according to user’ actual needs 5. Receival email address list: add email address into the list 6. Receival email address: receiver’s e-mail address 7. After all parameters setup, user can click “Test your account settings”.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Parameter Meaning Server name The name of the FTP server Server address The address of the FTP server Port The port number of the FTP server User name The user name of the FTP server Password The password of the FTP server Path The save path for FTP files 5.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 1. Select the user which needs to modify password and physical address in the user configuration list box. 2. Clicking “Modify” button will pop up “Modify user” dialog box as shown below. 3. Input original password of this user in the “password” text box. 4. Input new password in the “New password” and “Confirmation” text box. 5. Input computer’s physical address which is used to access the server in the “User PC MAC” text box. 6.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n 5.6.3 Security Configuration Enter into Advanced ConfigurationSecurity Configuration to see a tab shown below: Check “Enable IP address” check box, select “Deny the following IP address”, input IP address in the IP address list box and click “Add” button.
C Ch haap ptteerr 55 R Reem mo ottee C Co on nffiig gu urraattiio on n Import & Export Configuration: User can import or export the setting information from PC or to device. 1. Click “Browse” to select save path for import or export information on PC. 2. User can import or export all setting information to PC, but those two settings “user configuration” and “network configuration” are exceptional. Default Configuration Click “Load default” button to restore all system settings to default status. 5.6.
C Ch haap ptteerr 66 V Viid deeo o SSeeaarrcch h 6 Video Search Click “picture” icon and search the images which saved in the SD card. 1. Select date in the “calendar”, check “motion detection” relatively and click “search” button. Then the triggered snap pictures will be displayed in the list box. 2. Double click a filename or select a filename and then click “view” button in the list box to view snap pictures.
C Ch haap ptteerr 66 V Viid deeo o SSeeaarrcch h Item 1 Buttons Explanations Close: Select certain picture and click this button will close this preview picture.
C Ch haap ptteerr 88 IIP P--TTo oo oll 7 Mobile Surveillance This IP-CAM supports mobile surveillance by phones with Windows mobile, iPhone, Android and Blackberry OS. Please check the operation system version of mobile before use; and connect the IP-CAM to Internet. 7.1 Network Configuration Access device via LAN Step 1: Connect device via wireless router. Then checkmark DHCP both in router and device to automatically acquire IP address or enter the IP address manually.
C Ch haap ptteerr 88 IIP P--TTo oo oll 7.2 By Phones with iPhone OS Install through Iphone. Step 1: Open App Store software as shown in the figure on the left. Step2: Search “Provision Cam” and click “Free” button as shown in the figure on the right. Step 3: Click “Install App” button as shown in the figure on the left. Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically. Install Software through PC Step 1: Install iTunes store in PC and then login.
C Ch haap ptteerr 88 IIP P--TTo oo oll "Provision Cam" Instruction 1. Login Step 1: Choose network type. There are two network connection ways: 3G/3G +WIFI, enhanced video quality. This network supports main stream and sub stream. The real-time image will be displayed by using sub stream. 3G, normal video quality compared to the former network type. Step 2: Input server, account and password. Server: WAN IP address (or domain name) plus HTTP port of the device. For example: 210.21.183:89 or 123.
C Ch haap ptteerr 88 IIP P--TTo oo oll :Server list button. Click this button to add server list. :Help button. Help you know about the use of this software quickly. :CMS button. Make you preview the live image of multi-devices. :Log off button. Click this button to return to the login interface. :Screen mode button. You can choose 1,4,6,8,9,13 or 16 screen display mode. :Favorite channel display button.
C Ch haap ptteerr 88 IIP P--TTo oo oll Channel indicator instruction: :Video loss : Schedule recording :Sensor alarm :Motion alarm :Others :Motion /sensor alarm based recording or manual recording 3. Click Server list button to pop up the following picture. Add device: Click “Add” button in the top right corner to pop up a dialog box as shown in the following left picture. Input the relative information of the device and click “Save” button.
C Ch haap ptteerr 88 IIP P--TTo oo oll 2. When there is video playing in a screen, you can switch the channel by long pressing the screen as shown in Fig 2. 3. When no video is playing in a screen, click this screen to choose channel as shown in Fig 3. 4. When the single channel is playing, you can zoom in/out the image by swiping you finger up and down as shown in Fig 4. 5. When the single channel is playing, the channel can be switched by swiping your finger left or right as shown in Fig 5. 6.
C Ch haap ptteerr 88 IIP P--TTo oo oll 5. CMS Function This function makes multi-device managements and preview come true. Step 1: Click to enable CMS function. When this icon turns green, it means this function is enabled. Step 2: Click to choose channel as shown in the right picture. After you choose the channel, click “ok”, the system will display the related image automatically. If channels have been added into the group, you can see the images by clicking the group name.
C Ch haap ptteerr 88 IIP P--TTo oo oll Then click button to play. Only one favorite group can be collected. :Color means the channel or group has been collected. Grey means the channel or group isn’t collected. 7. Playback Interface Click “Playback” button to enter the playback interface. Then click “Search” button to search the file. To play the record by click this file name. 8. Click 9. Image View button to view the captured pictures.
C Ch haap ptteerr 88 IIP P--TTo oo oll 7.3 By Phones with Android Software Installation Step 1: Run “Play Store” (or Google market) program. Step 2: Search “Provision Cam”. Step 3: Press “Install” button. Step 4: Install the software subject to the notes. Once the downloading is done, the software will install automatically Login Menu Step 1: Configure the network of your device and mobile phone. Step 2: Input the WAN IP address/domain name and port of your device in the sever column.
C Ch haap ptteerr 88 IIP P--TTo oo oll Main Menu Live View The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete Record Playback: Click “Playback” in the main menu interface to enter playback interface. Then choose the channel you want to playback. This will take you to see the record file. Click this file to play. Pause/Play Stop Forward Backward Server List: In the main menu interface, click “Server list” to see the above picture on the left hand.
C Ch haap ptteerr 88 IIP P--TTo oo oll Add Server: Click button to pop up a window as shown in the above picture on the right hand. Enter the name, server, user and password of the device you want to add. Then click “Save” button to save the server. When you log in next time, you can choose and quickly access this server by clicking the little triangle button in the server column. Modify Server: Click button to modify the server information. Delete Server: Click button to delete the server information.
C Ch haap ptteerr 88 IIP P--TTo oo oll 8 IP-Tool Updating through IP-Tool Note: Do not cut off power supply and internet when updating. If the device is unable to start because of the failure of upgrade, it needs to retrofit. Acquire the IP-Tool from the supplier and then double click the IP-Tool icon to run this software. Then the device can be searched; if the device can’t be searched, please check whether the PC and the device connect to the network or not.
C Ch haap ptteerr 88 IIP P--TTo oo oll Modify IP address and click OK button to exit the dialog box. After that, IP-Tool will display the new IP address. Upgrade Software Select the device; right click “Update software”. Click “Update” to start upgrading,the progress bar will display as below. When upgrading, please do not disconnect PC and the device and make sure the power is on.
C Ch haap ptteerr 88 IIP P--TTo oo oll Input the relevant information and click “Browse” button to choose your update file. After that, click “Update Kernel” button to start updating. When upgrading, do not disconnect PC to device and make sure the power is on. The update progress bar will display as below: After finishing upgrading, a message box will pop up. After a while, the device will restart automatically.
C Ch haap ptteerr 99 Q Q& &A A 9 Q&A 1. Q: How to find my password if I forget it? A:Hold and press the default hole with spicula to reset. Default IP: 192.168.226.201 User name: admin Password: 123456 2. Q:Fail to connect devices through IE browser, why? A: Network doesn’t connect well. Please check the connection and make sure it connected well. B: IP is not available. Reset the valid IP. C: Web port number has been revised: contact administrator to get the correct port number.
C Ch haap ptteerr 99 Q Q& &A A Fig 4-1 Fig 4-2 ④ then click ok to finish setup. b. Other plug-ins or anti-virus blocks ActiveX. Please uninstall or close them. 5. Q:No sound can be heard, why? A:Without connect audio input device. Please connect and try again. B: Without enable audio function at the corresponding channel. Please check AUDIO item to enable this function. 6. Q:Why doesn’t the device connect to wireless? A: Check the statues of wireless router.
C Ch haap ptteerr 1100 SSp peecciiffiiccaattiio on n 10 Specification Model Image Sensor Effective Pixels Electronic Shutter Day & Night Min. Illumination Audio compression Audio Communication Image Settings BX-380IP Sony Exmor IMX138 1/3" CMOS 1280×1024 1/25s ~ 1/100000s ICR 0.
C Ch haap ptteerr 1100 SSp peecciiffiiccaattiio on n Notes: IP Camera User Manual-52
C Ch haap ptteerr 1100 SSp peecciiffiiccaattiio on n IP Camera User Manual-53