EN ES Digital CCTV Camera Effio-E Dome USER MANUAL www.provision-isr.com English / Spanish www.provision-isr.
Content EN English Manual 1 ES Manual en Español 34 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Note: Only professional technicians is allowed to open the front or back cover of this camera. ADVERTENCIA PELIGRO DE CHOQUES NO ABRIR NotA: Solo técnicos profesionales pueden abrir las cubiertas frontal o posterior de esta cámara. I Note: In order to avoid electrical shock or fire, please use proper power according to the manual.
Content Features Features Precautions Structure and Components System connection OSD Menu OSD Menu Operation 1) LENS 2) SHUTTER/AGC 3) WHITE BAL 4) BACKLIGHT 5) PICT ADJUST 6) ATR (Adaptive Tone Reproduction) 7) PRIVACY 8) DAY/NIGHT 9) NR 10) CAMERA ID 11) SYNC 12) LANGUAGE 13) CAMERA RESET Specifications WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Note: Only professional technicians is allowed to open the front or back cover of this camera.
System connection Structure and Components Video Cable Monitor BNC BNC DC 12V 1 2 Lens Color Camera ① Use one camera and one monitor AES Auto Electronic Shutter Switch (Auto) BLC Backlight Compensation Switch (Auto) AGC Auto Gain Control Switch (Auto) AWB Auto White Balance Switch (Auto) Monitor Video Cable: ①Power Supply Socket ②Video out MULTIPLEXER Video Divider VCN DVR Operation Steps ⑴ Confirm that the power supply for the camera is correct; Connect 1 Power Supply Socket to the power s
OSD Main Menu Main Menu Lens Auto/Manual Shutter Auto/Manual White Balance OSD Menu ▲ - Joystick Up – Moves the cursor upwards. ▼ - Joystick Down – Moves the cursor downwards. ◄ - Joystick Left – Moves the cursor to the left/change selection. ► - Joystick Right – Moves the cursor to the right/change selection. O - Joystick button – Press the Joystick to execute selections and displays a Submenu for an item with the mark.
- Use ▲ or ▼to scroll the setup page. OSD Menu Operation 1) LENS AUTO IRIS The LENS menu allows you to set the lens which attached to You’re camera. MANUAL IRIS LENS: Where the aperture is fixed or set manually by the user. Iris is mechanism which closes and opens allowing more or less light into the lens. AUTO IRIS LENS: In which the aperture is continuously controlled by the camera to automatically set to the desired level of brightness.
2) a) SHUTTER/AGC Here you can control SHUTTER function such as brightness level and AGC mode. The shutter – Controls the amount of light according to your own environment. Increase SHUTTER value in dark places for a brighter picture, Decrease SHUTTER value in places with more light for reducing amount of light. - Use ◄ or ► to select Auto and press O to enter the AUTO SETUP menu.
b) From the main menu SHUTTER/AGC MANUAL SETTINGS. - Scroll to SHUTTER/AGC using ▲ or ▼. SETUP MENU LENS SHUTTER/AGC WHITE BAL BACKLIGHT PICT ADJUST ATR MOTION DET AUTO AUTO ATW BLC ON ON NEXT EXIT - Use ▲ or ▼ to move up and down in the menu. - Use ◄ or ► to change SHUTTER value between 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000. - Use ◄ or ► to change AGC value between 6.00/ 12.00/ 18.00/ 24.00/ 30.00/ 36.00/ 42.00/ 44.80.
3) WHITE BAL a) ATW White balance adjustment - adjust the white balance of color necessary for the correct reproduction of colors including white as white and other colors based on it. In changing light conditions (changing the color temperature of light), white balance needs to be done again. White balance setting can be adjusted according to the color temperature of object.
b) USER 1/USER 2 4) BACKLIGHT Manually adjusts blue color lever and red color level. B-GAIN – Blue color level. R-GAIN – Red color level. - From main menu - Scroll to WHITE BAL using ▲ or ▼. - Use ◄ or ► to select USER 1 and press O to enter USER 1 menu. You can select between the special backlights modes – BLC or HLC according to your envioroment or turn it off. counter light, taillight, facilitating the photographed object to be separated from the background.
- Scroll to PICT ADJUST using ▲ or ▼. HLC (highlight compensation) (function that suppresses strong headlights at night and improves visibility to provide clear images with superb picture quality. SETUP MENU LENS SHUTTER/AGC WHITE BAL BACKLIGHT PICT ADJUST ATR MOTION DET AUTO AUTO ATW BLC ON ON NEXT EXIT SAVE ALL - Press O to enter to PICT ADJUST menu.
6) ATR (Adaptive Tone Reproduction) improves the ability to create more detailed picture in both high and low luminance areas exist in the same picture. Here you can adjust luminance level (refers to both high and low luminance) and contrast level according to your envioronment. - Scroll to ATR using ▲ or ▼. SETUP MENU LENS SHUTTER/AGC WHITE BAL BACKLIGHT PICT ADJUST ATR MOTION DET AUTO AUTO ATW BLC ON ON - Use ◄ or ► to LUMINANACE/CONTRAST value between LOW/MID/HIGH. - Scroll to NEXT using ▲ or ▼.
7) PRIVACY 8) DAY/NIGHT This function is aiming at the protection of personal privacy, you can select up to 4 parts on the screen to be masked with colored cover size and location of the area is also adjustable. This option allow you to adjust your camera to the day or night mode to give maximum quality of picture. You can select between AUTO/COLOR/B/W. - Scroll to DAY/NIGHT using ▲ or ▼. SETUP MENU Not in use.
a) AUTO sub menu b) B/W (Black/White) sub menu BURST: Selects whether to output the burst signal when the B/W (NIGHT mode established (forcibly) status has been identified. DELAY CNT: Sets the Night/Day identification transfer time. DAY -> NIGHT: Sets the threshold for identifying the Night status from the Day status. NIGHT -> DAY: Sets the threshold for identifying the Day status from the Night status. For setting BURST mode ON/OFF. - Use ◄ or ► to change parameters value.
9) NR This function is used to set the noise reduction function. - Scroll to NR using ▲ or ▼. NR MODE - This function is used to set the noise reduction mode. C LEVEL - Sets the Y filter strength. Y LEVEL - Sets the Y filter strength. SETUP MENU PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET BACK EXIT ON AUTO ON INT ENGLISH SAVE ALL - Press O to enter NR menu. - Use ▲ or ▼ to scroll in the menu.
10) CAMERA ID This option allows you to select a name for your camera and select rather it will be displayed or not. If selected off the name will not be displayed. CAMERA ID ABCDEFGHIJKLMNOPQRSTUV WXYZ0123789-!”#$%&’ ( )_`,: ; < = > ? @ \ ^ *. x . + / CHR1 CHR2 - Scroll to CAMERA ID using ▲ or ▼. SETUP MENU PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET BACK EXIT ◄ ► ▲ ▼ CLR POS ON AUTO ON INT ENGLISH RETURN - When finished go to RETURN and press O.
11) SYNC 12) LANGUAGE This option is not adjustable – it’s always on. The Line-Lock (L/L) feature allows the camera to synchronize its frame rate to the power line phase. The function is only available when the camera is operated by AC power. It allows the reduction of the fluorescent lights color rolling effect. When using 12v DC power, the camera is automatically set to internal (INT) synchronization mode.
Specifications 13) CAMERA RESET Reset camera to default settings. - Scroll to CAMERA RESET using ▲ or ▼. SETUP MENU PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET MODEL Image Sensor DX-372CS CXD4127 DSP System ON AUTO ON INT ENGLISH Effective Pixels PAL:976(H)x582(V) / NTSC:976(H)x494(V) Scanning System PAL/NTSC Horizontal Resolution 650TVL Min. Illumination 0.03 Lux / F1.0 OSD Menu Available( 7 languages ) Backlight Compensation BLC/HLC/OFF selectable Sync.
Specifications MODEL Image Sensor Specifications DA-372CS 1/3” Sony DS CCD (PAL:ICX673AK/NTSC:ICX672AK) CXD4127 DSP System Effective Pixels PAL:976(H)x582(V) / NTSC:976(H)x494(V) Scanning System PAL/NTSC Horizontal Resolution MODEL Image Sensor DI-372CS(PL) CXD4127 DSP System Effective Pixels 0.03 Lux / F1.0 PAL:976(H)x582(V) / NTSC:976(H)x494(V) Scanning System Min. Illumination DI-372CS(FL) 1/3” Sony DS CCD (PAL:ICX673AK/NTSC:ICX672AK) PAL/NTSC Horizontal Resolution 650TVL Min.
Specifications MODEL Image Sensor DSP System Effective Pixels Scanning System Horizontal Resolution Min. Illumination CXD4127 PAL:976(H)x582(V) / NTSC:976(H)x494(V) PAL/NTSC 650TVL 0.03 Lux / F1.0 (0 Lux IR On), 36 IR Leds / 25mt OSD Menu Available( 7 languages ) Backlight Compensation BLC/HLC/OFF selectable Sync. System S/N Ratio White Balance Gamma Correction Gain Control Internal ≥48db (AGC Off) ATW/PUSH/USER 1/USER 2/ANTI CR/MANUAL/PUSH CLOCK 0.
