User manual

2.4 Remote Controller
It uses two AAA size batteries.
 Open the battery cover of the Remote Controller.
 Place batteries. Please take care of the polarity (+ and -).
 Replace the battery cover.
The interface of remote controller is shown in Fig 2-9 Remote Controller.
Fig 2-9 Remote Controller
Button
Function
Power
Button
Switch off—to stop NVR. Use it before turning off the
power
Record Button
To record manually
-/-- /0-9 Digital
Button
Input number or choose camera
Fn1 Button
Unavailable temporarily
Multi Button
To choose multi screen display mode
Next Button
To switch the live image
SEQ
To enter into auto dwell mode
Audio
To enable audio output in live mode
Switch
To switch the output between BNC and VGA
Direction button
To move cursor in setup or pan/title PTZ
Enter Button
To confirm the choice or setup
Menu Button
To enter into menu
Exit Button
To exit the current interface
Focus/IRIS/Zoo
m/PTZ
PTZ Control button
Preset/Cruise/Tr
ack/Wiper/Light
Button
Enter preset/cruise/Track/Wiper/Light setup in PTZ mode.
You shall press PTZ button to go into PTZ setup mode. Then
select a channel and press PTZ button again prior to enabling
these buttons
Clear Button
To return to the previous interface
Fn2 Button
Unavailable temporarily
Info Button
Get information about NVR like firmware version, HDD
information
To control playback. Play/Pause/Stop/Previous Section/Next
Section/Rewind/Fast Forward
Snap Button
To take snapshots manually
Search Button
To enter into search mode
Cut Button
To set the start/end time for backup in playback mode
Backup Button
To enter into backup mode
Zoom Button
To zoom in the images
PIP Button
To enter into picture in picture setting mode