User manual
Fig 5-10 Record Configuration-Record
5.3.2 Record Bitrate
Step 1: Enter into MenuSetupRecord Record Bitrate. Refer to Fig 5-11:
Step 2: Set up rate, resolution, quality, encode and max bit stream.
Step 3: Select “All” to set the same settings for all channels.
Step 4: Click “Apply” button to save the setting.
Fig 5-11 Record Configuration-Record Bitrate
Parameter
Meaning
Record
To enable/disable recording for the channel
Audio
To enable/disable audio recording for the channel
Parameter
Meaning
Rate
Range from: 1-30（NTSC）1-25(PAL)
Resolution
Supports1080P, 720P, D1. Please select it as per the resolution your IP
camera supports.
Quality
The higher the value is, the clearer the recorded image is. Six options:
lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit stream
Range from: 256~12288kbps