User manual

If the value of the parameter is set to exceed the maximum resources of the system, the system
will automatically adjust it.
5.3.3 Time
Step 1: Enter into MenuSetupRecord  Time interface to set recording time. Refer to Fig
5-12:
Step 2: Set Pre-alarm record time and post-alarm record time. Select “All” to set the same
settings for all channels.
Step 3: Click “Apply” to save the setting.
Fig 5-12 Record Configuration-Time
Pre-alarm Record Time: Set the time in seconds to pre-record before the actual recording
begins.
Post-alarm Record Time: Set the time in seconds to post-record after the actual recording
has finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire Time: Set the expiration time for recorded video. If the set date is overdue, the
recorded files will be deleted automatically.
5.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the
video. The user can also choose a position for the stamp on the screen.
To set up stamp as follows:
Step 1: Enter into Menu SetupRecordStamp interface. Refer to Fig 5-13: