User manual

5.4.1 Schedule
This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a
day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A
highlighted area denotes selected timeline. Operate the following steps to set schedule:
Step 1: Enter into MenuSetupSchedule interface. Refer to Fig 5-14:
Step 2: Select channel and click “ ” button to add a certain day schedule. Click “ ”
button to delete the selected schedule.
If you want to apply the schedule setting of a certain channel to other or all channels, you need
to select channel and click “Copy” button.
Fig 5-14 Schedule Configuration-Schedule
You can also set week schedule by double-clicking in the grinding area. This will take you to
see a dialog box as Fig 5-15.
Step 1: Select a day and click “Add” button to schedule start time and end time. Then click
to save.
Step 2: Select other days and add schedule or copy settings from one schedule to the others
under the Apply Settings To item.
Fig 5-15 Schedule-Week Schedule
5.4.2 Motion Schedule
This tab allows setting schedule for motion based recording. The setting steps are as follows: