User manual

Fig 5-26 Network Configuration-Other Settings

Step 1: Enable DDNS server.

Step 2: Select DDNS server.

Step 3: Enter user name, password and host domain name of the registered website.

Step 4: Click “Test” button to test the effectiveness of the relevant information.

Step 5: Click “Apply” button to save the setting.

Note: The domain name selected by user is a banding domain name of NVR. User

should logon the website provided by the server supplier to register a user name and

password and then apply for a domain name online. After the successful application,

user can access the device from the IE client by inputting that domain name.

1． Domain name Registration （http://provision-isr-dns.com）

Note: DDNS is used to register for a hostname with DDNS username and password.

Provision ISR now allows you to use our mint DDNS server in order to create

a virtual address for your DVR on the internet. Each account can create up to

35 different addresses using your preferred domain name address instead of

using IP addresses. Follow the steps below to register your DVR's name and to

configure your DVR to use Provision ISR's Mint DDNS server.

(a) To register a domain with Provision-ISR DDNS server follow these steps:

1) Visit our website:

http://provision-isr-dns.com and

clicking "Registration"