Operation Manual

(b) Setting up your DVR to work with the DDNS server
1) The DDNS server will work only if the
three steps are completed; (1)
domain registration, (2) correct
network configuration with correct
preferred/alternate DNS servers, and
(3) correct port forwarding
configurations are set on the local
network (your router).
2) On the DVR Under Main menu => Settings => “Config” => “Network” set the correct DNS servers;
For example take a look at the correct settings on the figure below; the router's IP address is 10.0.0.138, the
e-mail account registered is [e-mail], and the host domain registered is "home.provision-isr-dns.com".
3) As shown on figure above: Check the “DDNS” check box, select “mintdns” for DDNS type, and fill in
all the other fields.
4) Make sure you have the preferred & alternate DNS servers filled in (under the “Network” settings
section): the preferred server should be the Internet gateway and the alternate server should be a
different DNS server– for example one of Google's DNS servers (IP 8.8.8.8 or 8.8.4.4)
5) Click the “Test” button
a. If the test succeeds click the “Apply” button
b. If the test fails check all fields again or call the support helpline
6) Now you can access the DVR using the DDNS (http://home.provision-isr-dns.com)